SN75176ADR
| Parameters | |
|---|---|
| Supply Voltage | 5V |
| Base Part Number | SN75176 |
| Pin Count | 8 |
| Output Voltage | 2.7V |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 50mA |
| Max Supply Current | 50mA |
| Data Rate | 10 Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 50mV |
| Number of Transceivers | 1 |
| ESD Protection | No |
| Receive Delay-Max | 35 ns |
| Simplex/Duplex | Half Duplex |
| Transmit Delay-Max | 60 ns |
| Supply Voltage1-Nom | 5V |
| High Level Input Current-Max | 0.00002A |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
SN75176ADR Overview
Designed for common LEDs, this driver IC features an enhanced 8-SOIC (0.154, 3.90mm Width) package.In this package, the receiver is mounted in the Cut Tape (CT) format.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.The wide receiver can be mounted on any Surface Mount-type PCB or development board.This differential driver consumes 4.75V~5.25V for its power supplyAs many as 1/1 receivers/drivers are eligible for use on this electronic part.As its name implies, this ic receiver is designed for applications where 0°C~70°C is the operating temperature.Driver ICs with a supply voltage range of 5V can operate efficiently.For driving and receiving signals from data, this wide receiver has 8 terminations integrated.The pinouts for this transceiver are standardized to meet the needs of the market.The base part number SN75176 identifies the product type, temperature, package, etc., so you can search for more variants by using it.8-pin driver chip with enhanced power dissipation.In terms of resolution, this ic receiver was capable of providing a 1-bit resolution.This receiver is typically specified with a resolution of 1 bits. As mentioned above, the transceiver module is designed to operate from an input voltage supply of 5V.Line Driver or Receivers is a subcategory of this rf transceiver module.The driver IC in this product is designed so that it can be powered by 5V.It implements 1 transceivers in total.Input currents above 50mA could lead to mal-functions in this can transceiver.Using 2.7V as a voltage source, Wide receiver is able to deliver voltage.
SN75176ADR Features
Cut Tape (CT) package
8 pin count
8 pins
5V power supply
SN75176ADR Applications
There are a lot of Texas Instruments SN75176ADR Drivers/Receivers/Transceivers applications.
- Cordless telephone
- VoIP phones
- Ethernet circuitry
- Wireless projection application for business talks
- Bridges
- Fiber-to-the-desktop
- Wireless 3D game
- Satellite ground stations
- Wireless security systems
- Switching system
