SN75ALS181NSR
| Parameters | |
|---|---|
| Logic Function | Receiver, Transceiver |
| Data Rate | 10 Mbps |
| Differential Output | YES |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 60mV |
| Number of Transceivers | 1 |
| ESD Protection | No |
| Receive Delay-Max | 25 ns |
| Simplex/Duplex | Full Duplex |
| Transmit Delay-Max | 20 ns |
| Supply Voltage1-Nom | 5V |
| Output Low Current-Max | 0.00002A |
| High Level Input Current-Max | 0.00002A |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 208.312296mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 75ALS181 |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Operating Supply Current | 30mA |
| Nominal Supply Current | 30mA |
| Max Supply Current | 30mA |
SN75ALS181NSR Overview
Driver ICs with enhanced 14-SOIC (0.209, 5.30mm Width) packages are excellent for driving LEDs with common characteristics.Cut Tape (CT) package is used to mount this receiver.Several solutions have used this Transceiver can transceiver in a variety of applications due to its Transceiver IC nature.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.This differential driver uses 4.75V~5.25V for power supply.It is possible to have up to 1/1 receivers/drivers in use simultaneously with this electronic part.The operating temperature of this ic receiver is 0°C~70°C. It is primarily designed for applications with low temperatures.5V is the supply voltage range that this line driver ic can efficiently operate with.Integrated into this wide receiver are 14 terminations that are used for driving and receiving signals from data.It is packaged with 14 pinouts that are market standard for this particular transceiver.For more variants of this part, try searching with the base part number 75ALS181, which indicates the product type, temperature, package, etc.A 14-pin driver IC with enhanced power dissipation control is featured here.This ic receiver provided a 1-bit resolution capability. Typically, the resolution of this receiver is specified to be 1 bits.There is a 5V input voltage supply that can be used to operate this transceiver module.A Line Driver or Receivers subcategory can be assigned to this rf transceiver module.This driver IC is designed to operate from a 5V power supply.The module isolated transceiver implements a total of 1 transceivers.There is no matter what the input voltage is. The integrating circuit is able to drive LEDs with an input voltage of 30mA.If the input current exceeds 30mA, this can transceiver could malfunction.
SN75ALS181NSR Features
Cut Tape (CT) package
14 pin count
14 pins
5V power supply
SN75ALS181NSR Applications
There are a lot of Texas Instruments SN75ALS181NSR Drivers/Receivers/Transceivers applications.
- Wireless projection application for business talks
- SONET/SDH Network
- Bridges
- Wireless HD Photography
- Car radio
- Wireless modems
- Switching system
- TV signal transmission
- Remote controls
- Indoor ad hoc meeting
