SN75ALS193D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Receiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | 75ALS193 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Circuits | 4 |
| Operating Supply Current | 35mA |
| Nominal Supply Current | 35mA |
| Data Rate | 20 Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | NO |
| Output Polarity | TRUE |
| Protocol | RS422, RS423 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 0/4 |
| Receiver Number of Bits | 4 |
| Receiver Hysteresis | 120mV |
| Receive Delay-Max | 22 ns |
| Supply Voltage1-Nom | 5V |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75ALS193D Overview
Designed for common LEDs, this driver IC features an enhanced 16-SOIC (0.154, 3.90mm Width) package.Tube package is used to mount this receiver.The Receiver can transceiver technology has enabled this part to power many solutions for a variety of uses.PCB or development board with Surface Mount-type connectors can accommodate this wide receiver.Power supply for this differential driver is 4.75V~5.25V.As many as 0/4 receivers/drivers are eligible for use on this electronic part.IC receiver's like this are designed for applications requiring a 0°C~70°C operating temperature.This line driver ic can operate efficiently with a supply voltage range of 5V.In this wide receiver, 16 terminations are integrated for driving and receiving signals from data.There are 16 pinouts available on this transceiver which are market standard.Since the base part number 75ALS193 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.An enhanced power dissipation control driver IC featuring 16 pins.In most cases, the receiver will be specified with a 4-bit resolution.There are two types of input voltage supply available for this IC, 5V.IC5V is a high performance driver IC designed to work with a 5V power supply.Embedded 0 drivers are included on the integrator circuit.It is capable of driving LEDs with a voltage of 35mA as the input voltage to this integrating circuit.As far as I am aware, this transceiver module is composed of 4 circuits in total.
SN75ALS193D Features
Tube package
16 pin count
16 pins
5V power supply
SN75ALS193D Applications
There are a lot of Texas Instruments SN75ALS193D Drivers/Receivers/Transceivers applications.
- Fast Ethernet
- Satellite communications networks
- Metro access rings
- Military satellite communications
- WDM transmission
- interconnection between switches
- Remote controls
- Aircraft navigation
- Wireless teaching
- Wireless security systems
