SN75C1168N
| Parameters | |
|---|---|
| Supply Voltage | 5V |
| Base Part Number | 75C1168 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Operating Supply Current | 9mA |
| Nominal Supply Current | 9mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 10 Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 60mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Supply Voltage1-Nom | 5V |
| Out Swing-Min | 2 V |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RECEIVER 3-STATE OUTPUTS |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
SN75C1168N Overview
The enhanced 16-DIP (0.300, 7.62mm) package makes it an excellent LED driver.Tube package is used to mount this receiver.Several solutions have used this Transceiver can transceiver in a variety of applications due to its Transceiver IC nature.Ideally, you should place this wide receiver on a Through Hole-type PCB or development board.A power supply of 4.5V~5.5V is used by this differential driver.The field can have up to 2/2 eligible receivers/drivers at once when using this electronic part.This ic receiver has been primarily designed for applications where the operating temperature is 0°C~70°C.There is a voltage range of 5V for this line driver ic, so it can operate efficiently.The integrated terminations of this wide receiver allow it to drive and receive signals from data.As a standard package, this transceiver comes with a 16-pin layout that follows the market standard.75C1168 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.It is a 16-pin driver IC with enhanced power dissipation controls.This receiver is typically specified with a resolution of 2 bits. There is a 5V input voltage supply that can be used to operate this transceiver module.A subcategory named Line Driver or Receivers can be used to group this rf transceiver module.Driver ICs are designed to work with a 5V power supply and this driver IC is one of them.There are 1 transceivers in total implemented by this IC.This electronic part can have?up to 2 eligible drivers on the field at once.?With the RECEIVER 3-STATE OUTPUTS function, this optical transceiver module improves accuracy and stability of signal management overall.Using a 9mA input voltage, this integrating circuit is capable of driving LEDs with an output voltage of 20 V.
SN75C1168N Features
Tube package
16 pin count
16 pins
5V power supply
SN75C1168N Applications
There are a lot of Texas Instruments SN75C1168N Drivers/Receivers/Transceivers applications.
- Automation systems
- Wireless smart house
- Military satellite communications
- Aircraft navigation
- Notebook
- Wireless showroom
- Fiber optic cable connection network
- Vehicle
- Wireless HD Photography
- Ship
