SN75LVCP422DB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | 0°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Buffer, ReDriver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | eSATA |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 75LVCP422 |
| Pin Count | 20 |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 2 |
| Operating Supply Current | 77mA |
| Output Characteristics | DIFFERENTIAL |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Interface Standard | GENERAL PURPOSE |
| Receive Delay-Max | 0.5 ns |
| Data Rate (Max) | 3Gbps |
| Transmit Delay-Max | 0.5 ns |
| Supply Voltage1-Nom | 3.3V |
| Delay Time | 300ps |
| High Level Input Current-Max | 0.00001A |
| Signal Conditioning | Input Equalization, Output Pre-Emphasis |
| Height | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75LVCP422DB Overview
To make transportation easier, the power buffer is packaged in a 20-SSOP (0.209, 5.30mm Width).It has been packaged in Tube packages and is ready for power buffer.Surface Mount Universal mout allows easy adaptation.Typical Buffer, ReDriver type.There is 3V~3.6V voltage used by this op amp buffer.A total of 2 channels cooperate to ensure high-quality output.There should be a setting of 0°C~85°C for the operating temperature in order to avoid any malfunctions.Among other applications, this operational amplifier buffer targets the eSATA platform.You can also search with "75LVCP422" if you want to find more pin-to-pin solutions that meet your special needs.There is a 20 terminal on the op amp buffer, which can be seen in the picture below.During reflow, the peak temperature of the material is determined by the number 260.Due to the 3.3V voltage supply, this splitter can handle a multitude of demanding tasks.It is important to note that the pinout of the Power buffer starts from the 20 pins that it has.The op amp buffers have 20 pins.This power buffer operates from a voltage of 77mA.The voltage required for normal operation is 3.3V.Receiver uses 1-Bit technology.
SN75LVCP422DB Features
2 channels.
Mainly used in eSATA.
1-Bit receiver.
SN75LVCP422DB Applications
There are a lot of Texas Instruments SN75LVCP422DB Signal Buffers, Repeaters, Splitters applications.
- Test Equipment
- Network Switches/Routers
- Clock Distribution
- Loopback
- SATA SSDs or HDDs
- Desktop Computers
- Digital Cross-Connects
- DSLAMs
- Storage Area Networks
- Data or Clock Signal Amplification
