SNJ54AHC123AJ
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Package / Case | CDIP |
| Surface Mount | NO |
| Number of Pins | 16 |
| Packaging | Rail/Tube |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | EDGE TRIGGERED FROM ACTIVE-HIGH OR ACTIVE-LOW GATED LOGIC INPUTS |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Pin Count | 16 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 2 |
| Propagation Delay | 29.5 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 29.5 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | Multivibrator |
| Output Polarity | COMPLEMENTARY |
| Max I(ol) | 0.008 A |
| Screening Level | MIL-PRF-38535 |
| High Level Output Current | -8mA |
| Low Level Output Current | 8mA |
| Schmitt Trigger | YES |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Data/Clock Inputs | 2 |
| Height | 5.08mm |
| Length | 19.56mm |
| Width | 6.92mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SNJ54AHC123AJ Overview
The timer clock is suitable for CDIP package. It is used to pack in Rail/Tube case. The minimum operating temperature of the chip must not be lower than -55°C. It's best to use the timer clock when the temperature is below 125°C. The timer clock contains 16 pins. The supply voltage of the programmable timer can rate 3.3V. You can read the timer clock's additional feature in the follwing: EDGE TRIGGERED FROM ACTIVE-HIGH OR ACTIVE-LOW GATED LOGIC INPUTS. The sum of the IC chip pins is 16 . The number of the chip's terminations sums up to 16. The minimum supply voltage of the chip must not be lower than 2V. The supply voltage of this chip should not exceed 5.5V. The timer clock runs quiescent current at 4μA.
SNJ54AHC123AJ Features
Package / Case: Rail/Tube
Max Operating temperature at -55°C
Additional Feature: EDGE TRIGGERED FROM ACTIVE-HIGH OR ACTIVE-LOW GATED LOGIC INPUTS
Quiescent Current at 4μA
SNJ54AHC123AJ Applications
There are a lot of Texas Instruments SNJ54AHC123AJ Programmable Timers & Oscillators applications.
- Always On Systems
- Low-Power Wireless
- “Heartbeat” Timers
- Battery Powered Systems
- Building Automation
- Consumer Electronics
- Intruder Detection
- Intruder Detection
- Remote Data-Logger
- Long Time One Shot
