SNJ54LS165AFK
| Parameters | |
|---|---|
| Packaging | Rail/Tube |
| Number of Terminations | 20 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Technology | TTL |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Propagation Delay | 35 ns |
| Family | LS |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | COMPLEMENTARY |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Prop. Delay@Nom-Sup | 25 ns |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 30mA |
| fmax-Min | 25 MHz |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height | 2.03mm |
| Length | 8.89mm |
| Width | 8.89mm |
| Thickness | 1.83mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Number of Pins | 20 |
SNJ54LS165AFK Overview
This chip has a total termination count of 20. The case Rail/Tube contains it. Parts with a 5V operating supply voltage are specified. A total of 1 elements can be found on this part. 20 pins are present on the device. The recommended mounting method is Surface Mount. This electronic component is classified as LS. The operating supply voltage of this chip is noted to be within the range 5V. Additionally, please note the following: SISO OPERATION ALSO AVAILABLE. It can deliver voltage at 5V. The total number of IC chip bits is 8. This board has 20 pins in total. Under 125°C, it is recommended that it be used. This device should not be operated with a value lower than -55°C. A voltage of 5.5V is used to supply this voltage. It is important to note that this supply voltage is higher than 4.5V.
SNJ54LS165AFK Features
With 20 pins
Operate supply voltage at 5V
It supplies 5V power
SNJ54LS165AFK Applications
There are a lot of Texas Instruments SNJ54LS165AFK Shift Registers applications.
- temporary data storage
- Pattern Recognizers
- Delay Line
- ROM Chips
- Serial-to-parallel data conversion
- LED matrix control
- Data Processors
- Dual-rank shift, hold, and bus applications
- Flash Memory
- data manipulation
