SS466A
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | PCB, Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 Short Body |
| Number of Pins | 3 |
| Supplier Device Package | Radial Lead |
| Operating Temperature | -40°C~150°C TA |
| Packaging | Bulk |
| Published | 1998 |
| Series | SS400 |
| Feature | Temperature Compensated |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Solder |
| Type | Integrated Circuit (IC) |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Technology | Hall Effect |
| Voltage - Supply | 3.8V~30V |
| Current Rating | 7.5mA |
| Function | Latch |
| Current - Supply (Max) | 10mA |
| Number of Contacts | 3 |
| Output Type | Open Collector |
| Max Output Current | 20mA |
| Operating Supply Voltage | 12V |
| Leakage Current | 10μA |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 3.8V |
| Operating Supply Current | 10mA |
| Polarization | South Pole |
| Current - Output (Max) | 20mA |
| Nominal Supply Current | 10mA |
| Output Current | 20mA |
| Max Output Voltage | 400mV |
| Min Output Voltage | 400mV |
| Sensing Method | Hall Effect |
| Test Condition | 25°C |
| Max Supply Voltage (DC) | 30V |
| Min Supply Voltage (DC) | 3.8V |
| Sensing Range | 18mT Trip, -18mT Release |
| Height | 3mm |
| Length | 4.06mm |
| Width | 3mm |
| Thickness | 1.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SS466A Overview
The magnetic switch is packaged in Bulk to protect it from damage. As a safety precaution, the magnetic switches are packaged in TO-226-3, TO-92-3 Short Body packages. Good performance is achieved by powering the magnetic switches with 10mA as the maximum current. If these switches work, they can output 20mA as the maximum current. A magnetic switch should only output 20mA current. During operation, the switches have 3 pins. It is generally recommended that the switches output 20mA current. Magnetic switches can be set to 150°C for maximum operating temperature. In order for this magnetic switch to work, the operating temperature must not be below -40°C. When the magnetic switches are operating, they could supply 12V. There is a possibility of this electronic component providing a maximum voltage of 30V. Depending on the switch, 3.8V may be supplied as a minimum voltage. In theory, it should be capable of supplying 10mA when it is working.
SS466A Features
Packaging: Bulk
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Supply Voltage: 3.8V~30V
Operating Temperature: -40°C~150°C TA
Mounting Type: Through Hole
3 Pins
Output Type: Open Collector
Maximum Supply Current: 10mA
SS466A Applications
There are a lot of Honeywell Sensing and Productivity Solutions SS466A Magnetic Switches applications.
- Open/close sensor for LCD screens/doors/lids/trunks
- Motor and fan control
- Convertible roof position
- CNC machine tools
- Brushless DC (direct current) motor commutation
- Antitheft systems
- End of travel and index sensors
- Industrial process control
- Encoders
- Robotics control
