SS466A-T3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 Short Body |
| Supplier Device Package | Radial Lead |
| Operating Temperature | -40°C~150°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | SS400 |
| Feature | Temperature Compensated |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Technology | Hall Effect |
| Voltage - Supply | 3.8V~30V |
| Function | Latch |
| Current - Supply (Max) | 10mA |
| Output Type | Open Collector |
| Max Output Current | 20mA |
| Operating Supply Voltage | 12V |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 3.8V |
| Operating Supply Current | 10mA |
| Polarization | South Pole |
| Current - Output (Max) | 20mA |
| Nominal Supply Current | 10mA |
| Output Current | 20mA |
| Test Condition | 25°C |
| Sensing Range | 18mT Trip, -18mT Release |
| RoHS Status | RoHS Compliant |
SS466A-T3 Overview
A protective Tape & Reel (TR) package is used to protect the magnetic switch against damage. In order to prevent damage to the magnetic switches, they are packaged in TO-226-3, TO-92-3 Short Body packages. The magnetic switches can supply 10mA as the maximum current for good performance. The maximum current these switches can supply when they work is 20mA. For magnetic switches, the maximum output current should be 20mA. Switches should generally produce 20mA current. It is possible to set the maximum operating temperature for the magnetic switches to 150°C. This magnetic switch is only effective at temperatures greater than -40°C. Magnetic switches operate by supplying 12V voltage. Voltages of 30V were the maximum that could be supplied by this electronic component. Depending on the switch, 3.8V may be supplied as a minimum voltage. It works by supplying 10mA current nominally.
SS466A-T3 Features
Packaging: Tape & Reel (TR)
Moisture Sensitivity Level (MSL): Not Applicable
Supply Voltage: 3.8V~30V
Operating Temperature: -40°C~150°C TA
Mounting Type: Through Hole
Output Type: Open Collector
Maximum Supply Current: 10mA
SS466A-T3 Applications
There are a lot of Honeywell Sensing and Productivity Solutions SS466A-T3 Magnetic Switches applications.
- Wiper home/end position sensor
- Open/close sensor for LCD screens/doors/lids/trunks
- Position and limit sensing
- Control of magnetic apparatus
- Reading of magnetic data storage media
- Transmission
- Synchronization
- Pumps
- Counter pickup
- Flow-rate sensing
