SSM2518CPZ-RL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad, CSP |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | Depop, Digital Inputs, I2C, I2S, Mute, Short-Circuit and Thermal Protection, Shutdown, Volume Control |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Class D |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | IT ALSO OPERATES WITH 1.62-3.6V DIGITAL SUPPLY |
| HTS Code | 8542.31.00.01 |
| Subcategory | Audio/Video Amplifiers |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | SSM2518 |
| Pin Count | 20 |
| Output Type | 2-Channel (Stereo) |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 1.85V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Number of Channels | 2 |
| Output Power | 2.5W |
| Supply Type | Dual |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Max Output Power | 2.5W |
| Max Output Power x Channels @ Load | 2.5W x 2 @ 4 Ω |
| Harmonic Distortion | 10% |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SSM2518CPZ-RL Overview
The device is embedded in 20-WFQFN Exposed Pad, CSP .Amp parts is recommended that the chip be packaged in a Tape & Reel (TR) case.In addition, 20 terminations are used, which entail the termination of a transmission line with a device whose characteristic impedance matches the line's.Amp parts is configured to produce 2-Channel (Stereo) as Amp partss output.This electrical device is classified as type Class D .As part of the signal interface in a computer or other communication device, there are 20 pins.In this case, the electronic part is mounted in the way of Surface Mount .In this electrical device, the supply voltage is 2.5V~5.5V .Amp parts is equipped wAmp partsh 2 channels.During operation, Depop, Digital Inputs, I2C, I2S, Mute, Short-Circuit and Thermal Protection, Shutdown, Volume Control can be ensured.Amp parts is recommended that the operating temperature do not exceed -40°C~85°C TA °C.There are 20 pins on this device.Amp parts is part of Audio/Video Amplifiers .Amp parts is a member of the SSM2518 family.The chip should be mounted in the way of Surface Mount .There is a maximum output power of 2.5W kWh per hour from this electronic component.As a general rule, the supply voltage (Vsup) should be maintained above 1.62V .3.6V represents the maximal supply voltage (Vsup).A Dual supply type is used for this electronic part.The device is powered by a voltage supply of 1.85V volts.The chip is featured by IT ALSO OPERATES WITH 1.62-3.6V DIGITAL SUPPLY .
SSM2518CPZ-RL Features
20-WFQFN Exposed Pad, CSP package
20 pin count
SSM2518 family
2.5W kWh per hour
SSM2518CPZ-RL Applications
There are a lot of Analog Devices Inc. SSM2518CPZ-RL audio amplifiers applications.
- Test and measurement instruments
- Logarithmic and exponential operation circuits
- Video and image computer boards
- Portable electronic products powered by batteries
- Fast A/D and D/A converters, video amplifiers
- Medical imaging
- Vehicle electronics
- Power generator
- ECG equipment
- Communication
