banner_page

SST39SF010A-70-4C-PHE

5V V SST39 MPF? 32 Pin Memory IC SST39 MPF? Series SST39SF010A 1 Mb kb 42.04mm mm 25mA mA 8b b


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-SST39SF010A-70-4C-PHE
  • Package: 32-DIP (0.600, 15.24mm)
  • Datasheet: PDF
  • Stock: 829
  • Description: 5V V SST39 MPF? 32 Pin Memory IC SST39 MPF? Series SST39SF010A 1 Mb kb 42.04mm mm 25mA mA 8b b (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mounting Type Through Hole
Package / Case 32-DIP (0.600, 15.24mm)
Surface Mount NO
Number of Pins 32
Operating Temperature 0°C~70°C TA
Packaging Tube
Published 2000
Series SST39 MPF™
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 32
ECCN Code 3A991.B.1.A
Terminal Finish Matte Tin (Sn) - annealed
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 2.54mm
Frequency 14MHz
Base Part Number SST39SF010A
Pin Count 32
Operating Supply Voltage 5V
Power Supplies 5V
Memory Size 1Mb 128K x 8
Nominal Supply Current 25mA
Memory Type Non-Volatile
Access Time 70ns
Memory Format FLASH
Memory Interface Parallel
Data Bus Width 8b
Organization 128KX8
Write Cycle Time - Word, Page 20μs
Address Bus Width 17b
Density 1 Mb
Standby Current-Max 0.0001A
Sync/Async Asynchronous
Word Size 8b
Programming Voltage 5V
Data Polling YES
Toggle Bit YES
Command User Interface YES
Number of Sectors/Size 32
Sector Size 4K
Height 3.81mm
Length 42.04mm
Width 13.97mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SST39SF010A-70-4C-PHE Overview


Its memory type can be classified as Non-Volatile. It is supplied votage within Tube. As you can see, it is embedded in 32-DIP (0.600, 15.24mm) case. 1Mb 128K x 8 is the chip's memory size. As with most mainstream devices, this one uses FLASH-format memory. A wide operating temperature range makes this device ideal for a variety of demanding applications. With 4.5V~5.5V as the supply voltage, it is capable of handling memory ics. Its recommended mounting type is Through Hole. On the chip, there are 32 terminations that are planted. The comprehensive working procedure is supported by 1 functions in this part. In order to function properly, this ic memory chip should be powered by a voltage of 5V. It is common to select similar parts by referring to the device's base part number, SST39SF010A. The ic memory chip comes in a package with 32 pins that allows it to be connected to a computer. The memory device has a total of 32 pins, thus indicating that it has a total of 32 memory locations. This memory runs on an 5V operating supply voltage. This memory chip is rated 25mA for its nominal supply current. As for power supplies, this memory chip requires just 5V . In its target applications, this memory ics plays an important role as a member of the SST39 MPF? series of memory devices. There is a need for a programming voltage of 5V in order to modify the state of some nonvolatile memory arrays. A frequency of 14MHz is used to process the data on this memory chip. Total, there are 32 specifically sized divisions within this memory.

SST39SF010A-70-4C-PHE Features


Package / Case: 32-DIP (0.600, 15.24mm)
32 Pins
Operating Supply Voltage:5V
Freguency at 14MHz
14MHz terminals

SST39SF010A-70-4C-PHE Applications


There are a lot of Microchip Technology SST39SF010A-70-4C-PHE Memory applications.

  • main computer memory
  • Camcorders
  • graphics card
  • DVD disk buffer
  • nonvolatile BIOS memory
  • networking
  • personal digital assistants
  • servers
  • cell phones
  • personal computers

Write a review

Note: HTML is not translated!
    Bad           Good