ST485BDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ST485 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Interface | RS-422, RS-485 |
| Nominal Supply Current | 900μA |
| Data Rate | 2.5Mbps |
| Differential Output | YES |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 70mV |
| Number of Transceivers | 1 |
| Number of Input Lines | 2 |
| Transmit Delay-Max | 60 ns |
| Output Low Current-Max | 0.004A |
| Height | 1.75mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ST485BDR Overview
Driver ICs with enhanced 8-SOIC (0.154, 3.90mm Width) packages are excellent for driving LEDs with common characteristics.The Tape & Reel (TR) package houses this receiver.Being a Transceiver can transceiver, this part has empowered many solutions to serve for a variety of applications.On any Surface Mount-type PCB or development board, you can install this wide receiver.This differential driver uses 4.75V~5.25V for power supply.During operation, this electronic part may have up to 1/1 eligible receivers/drivers.This ic receiver has been primarily designed for applications where the operating temperature is -40°C~85°C.Driver ICs with a supply voltage range of 5V can operate efficiently.For driving and receiving signals from data, this wide receiver has 8 terminations integrated.It is packaged with 8 pinouts that are market standard for this particular transceiver.With the part number ST485 identifying the product type, temperature, package, etc., you can search with it to see more variants.A 8-pin driver IC with enhanced power dissipation control is featured here.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.In this ic receiver, the resolution was able to be set to a maximum of 1 bits.In the case of this receiver, a resolution of 1 bits is typically specified.There is a voltage supply of 5V required in order for this transceiver module to be operated.A Line Driver or Receivers subcategory can be assigned to this rf transceiver module.Driver ICs such as this one are designed to operate from 5V power sources.Transceivers implemented by this IC total 1 in total.
ST485BDR Features
Tape & Reel (TR) package
8 pin count
8 pins
5V power supply
ST485BDR Applications
There are a lot of STMicroelectronics ST485BDR Drivers/Receivers/Transceivers applications.
- Remote controls
- Mainframes, workstations or storage devices
- Wireless projection application for conferences
- Structural bonding
- Car radio
- Satellite communication
- Switches
- Point-to-point networking
- Gigabit Ethernet
- Ship
