STK551U392A-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 22 hours ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 29-SSIP Module, 21 Leads, Formed Leads |
| Number of Pins | 29 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Bulk |
| Published | 2012 |
| JESD-609 Code | e2 |
| Feature | Bootstrap Circuit, Latch Function, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 21 |
| Terminal Finish | Nickel/Tin (Ni/Sn) |
| Applications | AC Motors |
| Subcategory | Motion Control Electronics |
| Max Power Dissipation | 35W |
| Technology | IGBT |
| Voltage - Supply | 12.5V~17.5V |
| Terminal Position | SINGLE |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Frequency | 20kHz |
| Pin Count | 29 |
| Number of Outputs | 1 |
| Max Output Current | 20A |
| Interface | Logic |
| Analog IC - Other Type | AC MOTOR CONTROLLER |
| Output Configuration | Half Bridge (3) |
| Output Current | 15A |
| Output Current per Channel | 10A |
| Collector Emitter Voltage (VCEO) | 600V |
| Max Collector Current | 15A |
| Voltage - Load | 450V Max |
| Fault Protection | Current Limiting, Shoot-Through, UVLO |
| Switching Frequency | 20kHz |
| Load Type | Inductive |
| Height | 21.8mm |
| Length | 62mm |
| Width | 5.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STK551U392A-E Overview
H bridge is packaged using Bulk.In order to save costs, H bridge is included in the 29-SSIP Module, 21 Leads, Formed Leads package.Based on 12.5V~17.5V, improved reliabilbridge drivery can be achieved.In the way of Through Hole, H bridge circuit is mounted.As long as -40°C~150°C TJ operates at the right temperature, motor driver H bridge will operate normally.H bridge motor driver is pretty useful in a wide range of applications, including AC Motors.The PCB is mounted wH gateh Through Hole.As H bridge ic of its specific characteristics, it also possesses Bootstrap Circuit, Latch Function, Status Flag.A transmission line can be terminated at a 21 termination with the H bridge whose characteristic impedance matches the transmission line.29 pins is used as pronged contacts as H bridge ic of a signal interface.For the operation of the H bridge, a voltage supply of 15V is used.As its analog IC type, H bridge circuit has been incorporated with AC MOTOR CONTROLLER.The maximum load current that power supply can provide at a specified ambient temperature reaches 20A.The output and power supply pins are flowing wH-bridgeh current 15A.A number of 29 pins work together to provide this bridge driver with its specific functions.The output of this Hbridge is 1.This H bridge motor driver belongs to the subcategory of Motion Control Electronics and shares several similarities with other parts in that category.
STK551U392A-E Features
Available in 29-SSIP Module, 21 Leads, Formed Leads Package / Case
Operating Temperature at the range of Through Hole
STK551U392A-E Applications
There are a lot of ON Semiconductor STK551U392A-E Full Bridge Drivers, Half-Bridge Drivers applications.
- Home Appliances
- Networking Microprocessor Voltage Regulators
- High current, low profile DC-DC converters
- Voltage Regulators for CPUs
- High-Performance Gaming Motherboards
- Voltage Regulators for GPUs
- V-Core
- Quad DC motor
- Industrial Fans
- DC-DC Converters
