STM1001SWX6F
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.96mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STM1001 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 6μA |
| Nominal Supply Current | 15μA |
| Power Dissipation | 320mW |
| Max Supply Current | 15μA |
| Adjustable Threshold | NO |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.89V |
| Max Reset Threshold Voltage | 2.96V |
| Threshold Voltage | +2.93V |
| Undervoltage Threshold | 2.93V |
| Overvoltage Threshold | 2.96V |
| Height | 1.02mm |
| Length | 3.04mm |
| Width | 1.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM1001SWX6F Overview
There are 3 terminals connected to this power management, which makes it easy to mount. A Tape & Reel (TR) package is used to package the power management. Please find attached 1 functions for your reference in this IC power. This power management is made up of 1 channels which are available in a series format. There are TO-236-3, SC-59, SOT-23-3 functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. Power ics operate at 1 supply voltages. Surface Mount mounts IC management. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. 3 pins are present in total in this power management. 3 pins are on the supervisor. It is recommended that Vsup should not be less than 1.2V for this IC power. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Power management recommends the Surface Mount mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. Supplied with a operating current of 6μA, this PMIC is capable of fully function as specified. It is always advisable to use STM1001, the base supervisor number, when searching for similar PMICs from the manufacturer. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 15μA.
STM1001SWX6F Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
6μA operating supply current
STM1001SWX6F Applications
There are a lot of STMicroelectronics STM1001SWX6F Voltage Supervisors applications.
- Fire equipment power monitoring system
- External alarm
- Power distribution systems of infant care room
- Electrical fire monitoring system
- Smart meter
- Efficient information transmission
- Unattended substation automation
- Linux and server computing
- Urban rail transit weak current power monitoring
- Automotive power systems
