STM32F101C4T6A
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Surface Mount | YES |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | STM32F1 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 363mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.5mm |
| Frequency | 36MHz |
| Base Part Number | STM32F101 |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 37 |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~3.6V |
| Core Processor | ARM® Cortex®-M3 |
| Peripherals | DMA, PDR, POR, PVD, PWM, Temp Sensor, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 16KB 16K x 8 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 10x12b |
| Watchdog Timer | Yes |
| Data Bus Width | 32b |
| Number of Timers/Counters | 2 |
| Core Architecture | ARM |
| CPU Family | CORTEX-M3 |
| Number of ADC Channels | 10 |
| Number of PWM Channels | 4 |
| Number of I2C Channels | 1 |
| Height | 1.45mm |
| Length | 7mm |
| Width | 7.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM32F101C4T6A Description
The STM32F101C4T6A Low-density access line family includes the high-performance ARM Cortex?-M3 32-bit RISC core operating at a frequency of 36 MHz, high-speed embedded memories (Flash memory of 16 to 32 Kbytes and SRAM of 4 to 6 Kbytes), and a wide variety of enhanced peripherals and I/Os connected to two APB buses. Each device provides two USARTs, one I2C, one SPI, one 12-bit ADC, and up to two general-purpose 16-bit timers as standard communication interfaces.
The STM32F101C4T6A Low-density access line family runs between a power supply of 2.0 and 3.6 V and a temperature range of -40 to +85 °C. The development of low-power applications is made possible by a wide range of power-saving modes.
Devices in three different packages, with pin counts varying from 36 to 64, are part of the STM32F101C4T6A Low-density access line family. Different sets of peripherals are included depending on the device selected; the description that follows provides an overview of the whole spectrum of peripherals that are suggested for this family.
STM32F101C4T6A Features
Up to 5 timers
– Up to two16-bit timers, each with up to 4 IC/OC/PWM or pulse counter
– 2 watchdog timers (Independent and Window)
– SysTick timer: 24-bit downcounter
Up to 4 communication interfaces
– 1 x I2C interface (SMBus/PMBus)
– Up to 2 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)
– 1 × SPI (18 Mbit/s)
CRC calculation unit, 96-bit unique ID
ECOPACK? packages
Low power
– Sleep, Stop and Standby modes
– VBAT supply for RTC and backup registers
Debug mode
– Serial wire debug (SWD) and JTAG interfaces
DMA
– 7-channel DMA controller
– Peripherals supported: timers, ADC, SPIs, I2Cs and USARTs
1 × 12-bit, 1 μs A/D converter (up to 16 channels)
– Conversion range: 0 to 3.6 V
– Temperature sensor
Up to 51 fast I/O ports
– 26/37/51 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant
Core: ARM? 32-bit Cortex?-M3 CPU
– 36 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access
– Single-cycle multiplication and hardware division
Memories
– 16 to 32 Kbytes of Flash memory
– 4 to 6 Kbytes of SRAM
Clock, reset and supply management
– 2.0 to 3.6 V application supply and I/Os
– POR, PDR and programmable voltage detector (PVD)
– 4-to-16 MHz crystal oscillator
– Internal 8 MHz factory-trimmed RC
– Internal 40 kHz RC
– PLL for CPU clock
– 32 kHz oscillator for RTC with calibration
STM32F101C4T6A Applications
Application control
User interface
Medical and handheld equipment
PC peripherals, gaming and GPS platforms
Industrial applications
PLCs
Inverters
Printers
Scanners
Alarm systems
Video intercoms
HVACs
