STMPS2272MTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 200mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Current Rating | 1A |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STMPS2272 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 1A |
| Operating Supply Voltage | 5.5V |
| Interface | On/Off |
| Number of I/O | 4 |
| Nominal Supply Current | 13μA |
| Output Configuration | High Side |
| Output Current | 0A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 13μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 105m Ω |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STMPS2272MTR Overview
It's?packaged?in?the way?of?a?Cut Tape (CT).The 8-SOIC (0.154, 3.90mm Width) package contains it.The mounting type of the LED driver is Surface Mount.A General Purpose switch type is owned by it.It is recommended that the temperature be set to -40°C~125°C TJ for reliable performance.There are 2 outputs available on this lighting driver.The LED driving board operates at Not Required volts.It comes under the family of STMPS2272.It consists of 8 terminations in total.In order to operate, 8 pins are used.This results in the maximum output current dropping to 1A to meet the operation criteria.The LED driving board is mounted in the way of Surface Mount.A total of 8 pins are present on it.Currently, the LED driving board has 200mOhm resistance.When this case is used, the output current is set to 0A.It is recommended that the supply voltage be set at 5.5V in order to achieve maximum efficiency.Voltage input is limited to 5.5V volts.A voltage of 2.7V volts is the minimum input voltage.There is a maximum current requirement of 13μA for its operation.
STMPS2272MTR Features
Resistance of 200mOhm
STMPS2272MTR Applications
There are a lot of STMicroelectronics STMPS2272MTR Power Switches ICs applications.
- PC Card Hot Swap
- USB3.1 Power Delivery
- USB Protection
- Notebook PC
- Storage (HDDs, SSDs)
- Notebook and Tablet Computers
- Hot-Swap Systems
- Smartphone and PDA
- Low Voltage I/O System Power
- Smart Phones, Feature Phones
