STSR2PMCD-TR
| Parameters | |
|---|---|
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 750kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STSR2 |
| Pin Count | 8 |
| Output Voltage | 4.85V |
| Power Supplies | 5V |
| Power Dissipation | 270mW |
| Output Current | 2A |
| Propagation Delay | 130 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 130 ns |
| Rise Time | 40ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 40ns 30ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 3.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 3.5A |
| Switching Frequency | 750kHz |
| High Side Driver | NO |
| Length | 5mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | NRND (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 506.605978mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
STSR2PMCD-TR Overview
The 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.Gate drivers is packaged in the way of Tape & Reel (TR).A total of 2 drivers are integrated into its configuration.Its recommended mounting way is Surface Mount.When the supply voltage is set to 4.5V~5.5V, it can demonstrate its superiority.Gate drivers is designed wGate driversh a N-Channel MOSFET gate.Temperature range -40°C~125°C TJ is allowed for this device.A type of Non-Inverting is used for input in this program.Its configuration is based on a total of 8 terminations.Under its base part number STSR2, various related parts can be found.The device is mounted using Surface Mount.As a result, it is configured with 8 pins when it is designed.This device operates with 5V supply voltage.Mosfet driver employs an interface chip called HALF BRIDGE BASED MOSFET DRIVER as Mosfet drivers interface chip.Its subcategory of MOSFET Drivers contains various useful electronic components.On the board, there are 8 component pins.Mosfet driver supports an output current of 2A.Due to its power supplies of 5V, it solves the power supply problem for a wide range of applications.In this case, it outputs 4.85V voltage.The frequency of 750kHz can result in an improvement in efficiency.
STSR2PMCD-TR Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
STSR2PMCD-TR Applications
There are a lot of STMicroelectronics STSR2PMCD-TR gate drivers applications.
- Portable Navigation Devices
- High-speed communications
- RGB applications
- Line drivers
- Video amplifiers
- Pulse transformer drivers
- Motor Drives
- Refrigerator
- A/D drivers
- High frequency line drivers
