TAS5613APHDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | PurePath™ HD |
| JESD-609 Code | e4 |
| Feature | Depop, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Type | Class D |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.33.00.01 |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 1.8W |
| Voltage - Supply | 18V~38V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.8mm |
| Base Part Number | TAS5613 |
| Pin Count | 64 |
| Output Type | 1-Channel (Mono) or 2-Channel (Stereo) |
| Supply Voltage-Max (Vsup) | 13.2V |
| Power Supplies | 1236V |
| Supply Voltage-Min (Vsup) | 10.8V |
| Number of Channels | 2 |
| Nominal Supply Current | 20mA |
| Quiescent Current | 12.5mA |
| Output Power | 150W |
| Gain Bandwidth Product | 80 kHz |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Max Output Power | 300W |
| Max Output Power x Channels @ Load | 300W x 1 @ 2 Ω; 200W x 2 @ 3 Ω |
| Height | 1.2mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TAS5613APHDR Overview
In the 64-TQFP Exposed Pad package, it is embedded.The chip is recommended to be packaged in Tape & Reel (TR) case. Transmission lines can be terminated with 64 terminations, which have devices that match the line's characteristic impedance.In the configuration, 1-Channel (Mono) or 2-Channel (Stereo) is used as the output.Class D is the type of this electrical device.There are 64 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. There is an electronic part mounted in the way of Surface Mount .There is 18V~38V supply voltage for this electrical device.The chip is equipped with 2 channels.The operation of Depop, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown can be ensured.No temperature higher than 0°C~70°C TA should be used for operations.The number of pins is 64 .Audio/Video Amplifiers incorporates this part.Amp parts is a member of the TAS5613 family.A maximum output power of 300W kWh per hour can be achieved with this electronic part.To ensure normal operation, it is important to maintain the supply voltage (Vsup) above 10.8V .During this time, the maximum supply voltage (Vsup) reaches 13.2V .The device is powered by a voltage of 1236V volts.Amp parts belongs to the PurePath? HD series of electronic components.Without external influences, it consumes 12.5mA of quiescent current.
TAS5613APHDR Features
64-TQFP Exposed Pad package
64 pin count
TAS5613 family
300W kWh per hour
PurePath? HD series
TAS5613APHDR Applications
There are a lot of Texas Instruments TAS5613APHDR audio amplifiers applications.
- Band-pass filter
- Test equipment
- Inverse/same-phase proportional circuit
- Precision measurement
- Vehicle electronics
- Industrial control system
- Professional videography
- Proportional counter tubes
- Addition and subtraction operation circuits
- Scintillation detectors
