TAS5709PHP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 48-PowerTQFP |
| Surface Mount | YES |
| Number of Pins | 48 |
| Weight | 134.490138mg |
| Operating Temperature | 0°C~85°C TA |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Feature | Depop, Digital Inputs, I2C, I2S, Mute, Short-Circuit and Thermal Protection, Shutdown, Volume Control |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | Class D |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO REQUIRES 3.3V DIGITAL SUPPLY |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 5W |
| Voltage - Supply | 8V~24V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TAS5709 |
| Pin Count | 48 |
| Output Type | 2-Channel (Stereo) |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Channels | 2 |
| Nominal Supply Current | 83mA |
| Power Dissipation | 5W |
| Output Power | 20W |
| Supply Type | Triple |
| Bandwidth | 20 kHz |
| Max Output Power | 20.6W |
| Dual Supply Voltage | 18V |
| Min Supply Voltage (DC) | 3V |
| Max Output Power x Channels @ Load | 20.6W x 2 @ 8 Ω |
| Harmonic Distortion | 10% |
| Load Impedance | 6Ohm |
| Height | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TAS5709PHP Overview
The device is embedded in 48-PowerTQFP .There is a package in the form of Tray .In 48 terminations, the transmission line is terminated with an impedance-matching device.Output 2-Channel (Stereo) is configured for this device.The type of this electrical device is Class D .48 pins are pronged contacts on a computer or other communication device that form a signal interface.This electronic part is mounted in the way of Surface Mount .The supply voltage of this electrical device is 8V~24V .There are 2 channels available on the device.When operating, it is possible to ensure Depop, Digital Inputs, I2C, I2S, Mute, Short-Circuit and Thermal Protection, Shutdown, Volume Control .No temperature higher than 0°C~85°C TA should be used for operations.The device is equipped with a total of 48 pins.Amp parts is part of Audio/Video Amplifiers .Amp parts is part of the TAS5709 family.This electronic part has a maximum output power of 20.6W kWh per hour.Vsup reaches 3.6V at the maximum.This electronic part has a Triple supply type.There are additional features of ALSO REQUIRES 3.3V DIGITAL SUPPLY on the chip.
TAS5709PHP Features
48-PowerTQFP package
48 pin count
TAS5709 family
20.6W kWh per hour
TAS5709PHP Applications
There are a lot of Texas Instruments TAS5709PHP audio amplifiers applications.
- Signal transformation
- Radar
- Weak signal detection
- Signal filtering
- Comparator
- Test equipment
- Band-pass filter
- High input resistance broadband
- Power transmission
- Signal amplification
