TC1411NVOA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~16V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 16V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC1411N |
| Pin Count | 8 |
| Max Output Current | 1A |
| Nominal Supply Current | 500μA |
| Power Dissipation | 470mW |
| Propagation Delay | 40 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 40 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.045 μs |
| Output Peak Current Limit-Nom | 1A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1A 1A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.045 μs |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC1411NVOA Overview
The 8-SOIC (0.154, 3.90mm Width) package offers greater flexibility.Tube represents the package.There are 1 drivers installed for this device.Its recommended mounting way is Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.5V~16V supply voltage.Gate type N-Channel, P-Channel MOSFET has been used in its design.This device can operate at temperatures up to -40°C~150°C TJ.This program uses the input type of Non-Inverting.As a result of its configuration, it contains a maximum of 8 terminations.There are numerous related parts listed under its base part number TC1411N.The device is mounted with Surface Mount.When designing, the device is configured with 8 pins.The device is specifically designed to function with a supply voltage of 16V V.The interface chip of the system is BUFFER OR INVERTER BASED MOSFET DRIVER.1A is the maximum output current.There are 8 component pins on the board.According to its maximum power dissipation, 470mW is capable of conducting and transferring a large amount of power without overheating.
TC1411NVOA Features
Embedded in the Tube package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 470mW
TC1411NVOA Applications
There are a lot of Microchip Technology TC1411NVOA gate drivers applications.
- Pulse transformer drivers
- Industrial motor drives - compact, standard, premium, servo drives
- Digitally controlled power supplies
- 3-Phase Motor Inverter Driver
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Telecom switch mode power supplies
- Isolated Gate Driver Supplies
- Industrial Motor Inverter - Power Tools, Robotics
- RGB applications
- Isolated Supplies for controller area network (CAN),
