TC1412CPA
| Parameters | |
|---|---|
| Voltage - Supply | 4.5V~16V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | TC1412 |
| Pin Count | 8 |
| Max Output Current | 2A |
| Nominal Supply Current | 1mA |
| Power Dissipation | 730mW |
| Propagation Delay | 45 ns |
| Input Type | Inverting |
| Turn On Delay Time | 45 ns |
| Rise Time | 26ns |
| Fall Time (Typ) | 26 ns |
| Rise / Fall Time (Typ) | 18ns 18ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.05 μs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 0.05 μs |
| Length | 9.5mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 730mW |
| Technology | CMOS |
TC1412CPA Overview
In order to increase flexibility, the package 8-DIP (0.300, 7.62mm) is used.Tube represents the packaging method.The configuration is supported by 1 drivers.Gate drivers is mounted in the way of Through Hole.When the supply voltage is 4.5V~16V it is able to demonstrate its superiority.A gate type of N-Channel, P-Channel MOSFET is used in its design.Mosfet driver is possible to use this device at temperatures as low as 0°C~150°C TJ.Mosfet driver accepts input of type Inverting.There are 8 terminations to form the base of its configuration.You will find various related parts under the base part number TC1412.Mosfet driver is mounted using the Through Hole method.When designing, the device is configured with 8 pins.Its interface IC is BUFFER OR INVERTER BASED MOSFET DRIVER.In the maximum case, the output current can be 2A volts.Its subcategory of MOSFET Drivers contains various useful electronic components.8 pins are present on the component.Based on its maximum power dissipation of 730mW, it is clear that it is capable of transferring and conducting power loss without overheating.
TC1412CPA Features
Embedded in the Tube package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
TC1412CPA Applications
There are a lot of Microchip Technology TC1412CPA gate drivers applications.
- Motor controllers
- Active filtering
- DC-DC Converters
- Portable Media Players
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Portable Navigation Devices
- LCD/LCoS/DLP portable and embedded pico projectors
- Head-up and Head mounted displays
- Commercial air-conditioning (CAC)
- Telecom switch mode power supplies
