TC14433AELI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Voltage - Supply | 4.5V~8V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC14433A |
| Pin Count | 28 |
| Output Voltage | 5V |
| Operating Supply Voltage | 8V |
| Polarity | Unipolar |
| Configuration | 7 Segment |
| Number of Channels | 1 |
| Interface | BCD |
| Operating Supply Current | 1.4mA |
| Power Dissipation | 1W |
| Supply Current-Max | 7.4mA |
| Converter Type | ADC, DUAL-SLOPE |
| Resolution | 0.4375 B |
| Sampling Rate | 25 sps |
| Number of Analog In Channels | 1 |
| Max Dual Supply Voltage | 8V |
| Output Bit Code | BINARY CODED DECIMAL |
| Linearity Error-Max (EL) | 0.05% |
| Display Type | LED |
| Min Dual Supply Voltage | 4.5V |
| Dual Supply Voltage | 5V |
| Conversion Rate | 25 sps |
| Analog Input Voltage-Max | 0.2V |
| Output Format | SERIAL |
| Negative Supply Voltage-Nom | -5V |
| Digits or Characters | A/D 3.5 Digits |
| Height Seated (Max) | 4.57mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC14433AELI Overview
Display drivers is packaged in the way of Tube.A version 28-LCC (J-Lead) of the package includes it.I would like to point out that this electrical device has a LED display type.On this electronic component, Surface Mount is used for mounting.Electrical parts like this operate at -40°C~85°C temperatures.Display drivers should be possible to operate Display drivers wDisplay driversh a 4.5V~8VV power source.Typically, 28 terminations match the impedance of transmission lines.One of the members of the TC14433A family of devices is this device.Devices are made up entirely of 28 pins.Display drivers is designed wDisplay driversh 28 pins.There is an electronic component mounted on the board, which is mounted using the Surface Mount axis of the board.The supply voltage of this device is 5V.A supply current is required for 1.4mA to fully function.The same applies to Analog to Digital Converters.To ensure high efficiency, the supply voltage should be maintained at 8V.Using this function, you can obtain 5V's output voltage.On the basis of the source input voltage and the output voltage, there are ADC, DUAL-SLOPE converters.A 1 analog In channel means there is a bandwidth in the electromagnetic spectrum, which is 1.Channel numbers are increasing strongly / weakly: 1.
TC14433AELI Features
28-LCC (J-Lead) package
TC14433A family
28 pin count
28 pins
ADC, DUAL-SLOPE converters
TC14433AELI Applications
There are a lot of Microchip Technology TC14433AELI display drivers applications.
- Digital Clock, Thermometer, Counter, Voltmeter
- Multiplexing with common-cathode LED displays
- Industrial Display
- Automotive Telecom
- COPS? or Microprocessor Displays
- Climate Controls
- Vacuum Fluorescent Displays
- Panel meters
- Instrumentation Industrial Control
- Home Automation Goods
