TC4424CPA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 730mW |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Base Part Number | TC4424 |
| Pin Count | 8 |
| Output Voltage | 18V |
| Max Output Current | 3A |
| Interface | SCI, USART |
| Memory Size | 16kB |
| Nominal Supply Current | 2.5mA |
| RAM Size | 454B |
| Memory Type | EPROM |
| Power Dissipation | 730mW |
| Output Current | 3A |
| Max Supply Current | 2.5mA |
| Propagation Delay | 75 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 75 ns |
| Watchdog Timer | Yes |
| Data Bus Width | 8b |
| Number of Timers/Counters | 4 |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Core Architecture | PIC |
| Rise / Fall Time (Typ) | 23ns 25ns |
| Max Frequency | 8MHz |
| Channel Type | Independent |
| Number of Programmable I/O | 33 |
| Number of Drivers | 2 |
| Input Bias Current | 10μA |
| Turn On Time | 0.1 μs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.1 μs |
| Height | 3.68mm |
| Length | 9.78mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4424CPA Overview
In order to increase flexibility, the package 8-DIP (0.300, 7.62mm) is used.Gate drivers is package in Tube case.The configuration is supported by 2 drivers.Through Hole is mounted in the way of the device.When the supply voltage is 4.5V~18V it is able to demonstrate its superiority.This gate type has a N-Channel, P-Channel MOSFET design.This device is allowed to operate in a temperature range of 0°C~150°C TJ.This program uses the input type of Non-Inverting.Its configuration starts with 8 terminations.You will find various related parts under the base part number TC4424.Mosfet driver is mounted using Through Hole.There are 8 pins available in the device.There is a maximum output current of 3A.The number of component pins is 8.3A is the maximum output current supported by the device.Considering its maximum power dissipation, 730mW shows its maximum capacity to transfer and conduct power loss without overheating.For higher stability, the supply current should be kept at 2.5mA.In this case, it produces a voltage of 18V.
TC4424CPA Features
Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 730mW
TC4424CPA Applications
There are a lot of Microchip Technology TC4424CPA gate drivers applications.
- High frequency line drivers
- Head-up and Head mounted displays
- Line drivers
- Automotive Applications
- DC/DC converters
- Power factor correction (PFC) circuits
- Portable computers
- High current laser/LED systems
- Industrial Motor Inverter - Power Tools, Robotics
- Telecom switch mode power supplies
