TC4426EOA713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4426 |
| Pin Count | 8 |
| Max Output Current | 1.5A |
| Nominal Supply Current | 4.5mA |
| Power Dissipation | 470mW |
| Output Current | 1.5A |
| Max Supply Current | 4.5mA |
| Propagation Delay | 50 ns |
| Input Type | Inverting |
| Turn On Delay Time | 50 ns |
| Rise Time | 19ns |
| Fall Time (Typ) | 19 ns |
| Rise / Fall Time (Typ) | 19ns 19ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.04 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.06 μs |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC4426EOA713 Overview
Its 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.Tape & Reel (TR) represents the package.Gate drivers incorporates wGate driversh 2 drivers for Gate driverss configuration.There is a mounting bracket in the way of Surface Mount.In the absence of a 4.5V~18V supply voltage, its superiority can be demonstrated.There is a gate type of N-Channel, P-Channel MOSFET in this design.There is a temperature range for this device of -40°C~150°C TJ.Input type of Inverting is used.8 terminations constitute its foundation.Numerous related parts can be found under its base part number TC4426.Mounting the device requires Surface Mount.When designing, the device is configured with 8 pins.Its interface IC is BUFFER OR INVERTER BASED MOSFET DRIVER.Mosfet driver is possible for the output current to be as low as 1.5A.This subcategory of MOSFET Drivers has a number of useful electronic components.The board contains 8 pins for component connections.The output current supported by the device is 1.5A.Considering its maximum power dissipation, 470mW shows its maximum capacity to transfer and conduct power loss without overheating.Mosfet gate drivers is recommended to keep the supply current at 4.5mA to ensure greater stabilMosfet gate driversy.
TC4426EOA713 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 470mW
TC4426EOA713 Applications
There are a lot of Microchip Technology TC4426EOA713 gate drivers applications.
- Smart Phones
- Motor controllers
- High frequency line drivers
- Commercial and agricultural vehicles (CAV)
- Motor Drives
- Isolated Supplies for Motor Control
- Refrigerator
- PCMCIA applications
- High power buffers
- Dual-Battery Systems
