TC4626EOE713
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC4626 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Max Output Current | 1.5A |
| Power Supplies | 5V |
| Nominal Supply Current | 2.5mA |
| Power Dissipation | 760mW |
| Max Supply Current | 2.5mA |
| Propagation Delay | 55 ns |
| Input Type | Inverting |
| Turn On Delay Time | 55 ns |
| Rise Time | 40ns |
| Fall Time (Typ) | 35 ns |
| Rise / Fall Time (Typ) | 33ns 27ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.06 μs |
| Output Peak Current Limit-Nom | 1.5A |
| Driven Configuration | High-Side or Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.5A 1.5A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Turn Off Time | 0.07 μs |
| Height Seated (Max) | 2.64mm |
| Width | 7.495mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 760mW |
| Technology | CMOS |
| Voltage - Supply | 4V~6V |
| Terminal Position | DUAL |
TC4626EOE713 Overview
A higher level of flexibility is provided by its 16-SOIC (0.295, 7.50mm Width) package.There is a package in the form of Tape & Reel (TR).There are 1 drivers installed for this device.Surface Mount is mounted in the way.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4V~6V supply voltage.This device is designed with a N-Channel, P-Channel MOSFET gate type.The allowable temperature range that this device can be operated in is -40°C~85°C TA.Inverting is used as the input type.16 terminations constitute its foundation.Under its base part number TC4626, various related parts can be found.Mosfet driver is mounted using the Surface Mount method.During design, it is configured with 16 pins.In order to operate, a voltage of 5V has to be applied.BUFFER OR INVERTER BASED MOSFET DRIVER is employed as its interface IC.As a maximum, there is 1.5A limit to the output current.Several electronic components are included in its subcategory of MOSFET Drivers.Components with 16 pins are available.The maximum power dissipation of 760mW shows its maximum capability to transfer and conduct power loss without overheating.As a precaution, make sure the supply current is kept at 2.5mA.With its 5V power supply, it provides power for diverse applications.By using 1MHz frequency, efficiency can be increased.
TC4626EOE713 Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
16 pins
Maximum power dissipation of 760mW
TC4626EOE713 Applications
There are a lot of Microchip Technology TC4626EOE713 gate drivers applications.
- Dual-Battery Systems
- High-voltage isolated DC-DC converters
- High frequency line drivers
- Telecom switch mode power supplies
- 3-Phase Motor Inverter Driver
- Power factor correction (PFC) circuits
- Commercial air-conditioning (CAC)
- RGB applications
- DC-DC Converters
- UPS systems
