TC500COE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Other Analog ICs |
| Power Rating | 10mW |
| Max Power Dissipation | 10mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TC500 |
| Pin Count | 16 |
| Output Voltage | 900mV |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1 |
| Interface | Serial |
| Max Supply Voltage | 7.5V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 1mA |
| Number of Bits | 16 |
| Supply Current-Max (Isup) | 2.5mA |
| Resolution | 2 B |
| Sampling Rate | 10 sps |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage - Supply, Analog | ±4.5V~7.5V |
| Voltage - Supply, Digital | ±4.5V~7.5V |
| Power Consumption | 10mW |
| Height | 2.35mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC500COE Overview
In this case, it is packaged in the same way as 16-SOIC (0.295, 7.50mm Width).The electronic part in this example has been designed using 16 Bits.The package Tube contains this file embedded in it.In the 16 termination, an impedance-matching device is used for terminating a transmission line. This is referred to as the 16 termination.An electrical device like this provides regulated DC power for driving a load by converting alternatives voltage (AC voltage) to regulated direct voltage (DC voltage).A voltage of ±4.5V~7.5V is provided to this electrical device by its supply/digital voltage.In accordance with the base part number, its related parts can be identified.Supply voltage should remain at 5V.To ensure the reliability of the device, it operates at a minimal operating temperature of 0°C.In order to ensure the reliability of the system, it operates at the maximum operating temperature of 70°C.16 pins are included.It is capable of supporting 7.5V's maximum supply voltage.This device reaches its maximum operating voltage when it is supplied with a voltage of 4.5V.Mounted Surface Mount-ways.The analog IC employed by this device is called ANALOG CIRCUIT.The supply voltage should be maintained at 5V for high efficiency.The DC switching regulator operates on a supply current of 1mA.There is a part like this in Other Analog ICs.The nominal supply current amounts to 1mA.
TC500COE Features
TC500COE Applications
There are a lot of Microchip Technology TC500COE AFE applications.
- Scientific instruments.
- Data Acquisition Systems
- Digital Multimeters, PLC's (Programming Logic Controllers)
- Displaying
- Music recording
- CMOS Image sensors for mobile applications
- Industrial Process Control
- Uninterrupted Power Supplies
- 3-phase power control
- Wireless local loop
