Parameters |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
TO-226-3, TO-92-3 (TO-226AA) |
Number of Pins |
3 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Bulk |
Published |
2004 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
3 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
300mW |
Technology |
CMOS |
Terminal Position |
BOTTOM |
Number of Functions |
1 |
Supply Voltage |
2V |
Base Part Number |
TC54VN1402 |
Output |
Open Drain or Open Collector |
Pin Count |
3 |
Power Supplies |
0.7/6V |
Number of Channels |
1 |
Max Supply Voltage |
10V |
Min Supply Voltage |
700mV |
Operating Supply Current |
3.6μA |
Nominal Supply Current |
1.1μA |
Power Dissipation |
300mW |
Adjustable Threshold |
NO |
Quiescent Current |
1.1μA |
Watchdog Timer |
No |
Reset |
Active Low |
Voltage - Threshold |
1.4V |
Number of Voltages Monitored |
1 |
Min Reset Threshold Voltage |
1.37V |
Max Reset Threshold Voltage |
1.43V |
Threshold Voltage |
+1.4V |
Undervoltage Threshold |
1.37V |
Overvoltage Threshold |
1.43V |
Height |
5.334mm |
Length |
5.21mm |
Width |
4.191mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TC54VN1402EZB Overview
There are 3 terminals connected to this power management, which makes it easy to mount. A Bulk package is used to package the power management. Please find attached 1 functions for your reference in this IC power. Power management consists of 1 channels, each of which can be used independently. In this PMIC, you can find TO-226-3, TO-92-3 (TO-226AA) functions for your reference. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. A supply voltage of 2V is used to conduct the PMIC chip. When 1 is applied to the power ic, it conducts. The power management is mounted by a Through Hole-axis. Power Management Circuits is a subcategory of this PMIC chip. The total number of pins on this power management is 3. The pins of the power management system count 3. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 700mV. There should be no more than 10V volts of maximum supply voltage (Vsup) in this power management. Through Hole is the recommended mounting type. We recommend setting the supervisors to -40°C~85°C TA degrees. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. For this power management, there is an 3.6μA volt supply current. A similar IC managements number of the manufacturer can always be found by using TC54VN1402, the base power ics number. The power management must be powered by 0.7/6V volts to function properly.
TC54VN1402EZB Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
3.6μA operating supply current
TC54VN1402EZB Applications
There are a lot of Microchip Technology TC54VN1402EZB Voltage Supervisors applications.
- Leakage protection
- Power distribution systems of ICU
- Refrigeration
- Microcontroller system
- Magnetic resonance imaging
- Electronics installed in the vehicle
- Important electronics for automotive safety
- Set top box
- Telecommunications equipment
- Sensitive sensors