TC7117ACPL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.600, 15.24mm) |
| Number of Pins | 40 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Analog to Digital Converters |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TC7117A |
| Pin Count | 40 |
| Output Voltage | 700mV |
| Operating Supply Voltage | 5V |
| Polarity | Unipolar |
| Power Supplies | 9V |
| Configuration | 7 Segment |
| Interface | Parallel |
| Operating Supply Current | 800μA |
| Nominal Supply Current | 800μA |
| Power Dissipation | 1.23W |
| Number of Bits | 3 |
| Converter Type | ADC, DUAL-SLOPE |
| Resolution | 0.4375 B |
| Number of Analog In Channels | 1 |
| Output Bit Code | BINARY |
| Linearity Error-Max (EL) | 0.05% |
| Display Type | LED |
| Number of A/D Converters | 1 |
| Dual Supply Voltage | 5V |
| Number of LEDs | 7 |
| Number of Segments | 24 |
| Analog Input Voltage-Min | 2.4V |
| Digits or Characters | A/D 3.5 Digits |
| Height | 4.95mm |
| Length | 53.21mm |
| Width | 14.73mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TC7117ACPL Overview
As with Tube, the package is designed similarly.A package with version 40-DIP (0.600, 15.24mm) includes it.I would like to point out that this electrical device has a LED display type.This electronic part is mounted in the way of Through Hole.Electrical parts like this operate at 0°C~70°C temperatures.Typically, transmission lines are terminated by 40 terminations with devices whose characteristic impedance matches that of the transmission lines.A TC7117A device is one of those in the TC7117A family.All of the device's pins are 40 pins.40 pins are used in the design.As this electronic component is mounted on the board using the Through Hole axis, we can adjust the position of the component.5V is the supply voltage.For 800μA to function properly, it requires current supply.The Seller Group has two 24 segments, representing the "Electronics" segment of any member of its equipment solutions business.The same applies to Analog to Digital Converters.The supply voltage should be maintained at 5V for high efficiency.The power supply used for this machine is the 9V power supply.700mV is provided with the output voltage by it.Depending on the source voltage and output voltage, ADC, DUAL-SLOPE converters are available.There are 1 analog In channels, which mean bandwidth in the electromagnetic spectrum capable of carrying one 1 standard television signal that is delivered in an analog format.Drivers was designed using 3 BDriverss.
TC7117ACPL Features
40-DIP (0.600, 15.24mm) package
TC7117A family
40 pin count
40 pins
9V power supplies
ADC, DUAL-SLOPE converters
TC7117ACPL Applications
There are a lot of Microchip Technology TC7117ACPL display drivers applications.
- Remote Displays
- Gaming Machines Security
- Digital Clock, Thermometer, Counter,
- Smart Display
- Display Driver
- Dlsplay Integrtty ls Compromissd
- Instrument Clusters
- Bar Graphs and Matrix Displays
- Relay Driver
- Bar-Graph Displays
