TC74HC273AF(EL,F)
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2009 |
| Series | TC74HC |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Function | Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 2/6V |
| Load Capacitance | 50pF |
| Clock Frequency | 66MHz |
| Propagation Delay | 200 ns |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 25ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 24000000Hz |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TC74HC273AF(EL,F) Overview
In the form of 20-SOIC (0.209, 5.30mm Width), it has been packaged. Package Cut Tape (CT)embeds it. This output is configured with Non-Inverted. It is configured with the trigger Positive Edge. Surface Mountis in the way of this electric part. With a supply voltage of 2V~6V volts, it operates. A temperature of -40°C~85°C TAis considered to be the operating temperature. A flip flop of this type is classified as a D-Type. In this case, it is a type of FPGA belonging to the TC74HC series. A frequency of 66MHzshould be the maximum output frequency. There are 1 elements in it. This process consumes 40μA quiescents. A total of 20 terminations have been made. Its input capacitance is 5pF farads. It is mounted in the way of Surface Mount. There are 20pins on it. In this device, the clock edge trigger type is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. In light of its reliable performance, this T flip flop is well suited for TAPE AND REEL. It runs on 2/6Vvolts of power.
TC74HC273AF(EL,F) Features
Cut Tape (CT) package
TC74HC series
20 pins
2/6V power supplies
TC74HC273AF(EL,F) Applications
There are a lot of Toshiba Semiconductor and Storage TC74HC273AF(EL,F) Flip Flops applications.
- Storage registers
- Registers
- Control circuits
- Patented noise
- Automotive
- Shift registers
- ATE
- Bus hold
- Digital electronics systems
- Modulo – n – counter
