TC74LVX273FTEL
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | TC74LVX |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LVX273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Number of Bits | 8 |
| Clock Frequency | 90MHz |
| Propagation Delay | 14.5 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 9.6 ns |
| Family | LV/LV-A/LVX/H |
| Current - Output High, Low | 4mA 4mA |
| Max Propagation Delay @ V, Max CL | 14.5ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TC74LVX273FTEL Overview
The flip flop is packaged in 20-TSSOP (0.173, 4.40mm Width). You can find it in the Tape & Reel (TR)package. There is a Non-Invertedoutput configured with it. It is configured with a trigger that uses a value of Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A voltage of 2V~3.6Vis used as the supply voltage. Currently, the operating temperature is -40°C~85°C TA. A flip flop of this type is classified as a D-Type. In this case, it is a type of FPGA belonging to the TC74LVX series. Its output frequency should not exceed 90MHz Hz. D latch consists of 1 elements. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. Members of the 74LVX273family make up this object. Power is supplied from a voltage of 2.7V volts. Its input capacitance is 4pFfarads. Electronic devices of this type belong to the LV/LV-A/LVX/Hfamily. There is an electronic component mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. This device has Positive Edgeas its clock edge trigger type. An electronic part with 8bits has been designed. In this case, the maximum supply voltage (Vsup) reaches 3.6V. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. To achieve this superior flexibility, 8 circuits are used. 4μAquiescent current consumed.
TC74LVX273FTEL Features
Tape & Reel (TR) package
TC74LVX series
20 pins
8 Bits
TC74LVX273FTEL Applications
There are a lot of Toshiba Semiconductor and Storage TC74LVX273FTEL Flip Flops applications.
- Shift Registers
- Circuit Design
- Convert a momentary switch to a toggle switch
- Frequency Divider circuits
- Instrumentation
- ESD performance
- Latch-up performance
- Supports Live Insertion
- Single Down Count-Control Line
- Buffer registers
