TC9401CPD
| Parameters | |
|---|---|
| Min Dual Supply Voltage | 4V |
| Dual Supply Voltage | 5V |
| Negative Supply Voltage-Nom | -5V |
| Positive Input Voltage-Max | 5V |
| Full Scale | ±40ppm/°C |
| Height | 4.953mm |
| Length | 762μm |
| Width | 7.112mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Volt to Frequency and Frequency to Volt |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Analog Special Function Converters |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 100kHz |
| Base Part Number | TC9401 |
| Pin Count | 14 |
| Number of Outputs | 2 |
| Output Voltage | 18V |
| Operating Supply Voltage | 12V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1 |
| Interface | Serial |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 8V |
| Power Dissipation | 730mW |
| Resolution | 1.625 B |
| Max Dual Supply Voltage | 7.5V |
| Power Consumption | 27mW |
| Linearity | ±0.02% |
TC9401CPD Overview
As part of the 14-DIP (0.300, 7.62mm) package, it is embedded. Located in Through Hole, this electronic component is mounted. There is a package in the way of Tube. There is a type Volt to Frequency and Frequency to Volt of electrical device. In 14 terminations, the transmission line is terminated with a device that has a matching characteristic impedance. The device is equipped with a pin count of 14. The device is powered by a supply voltage of 5V. Parts that are related to the base part number can be identified. 14 pins are pronged contacts found in computer or other communication devices, as part of a signal interface. For its reliability, it operates at a minimum operating temperature of 0°C. As a measure to ensure its reliability, it operates at a maximum operating temperature of 70°C. It is mounted in the way of Through Hole. Analog Special Function Converters contains this part. This should be used if the supply voltage (Vsup) exceeds 8V. In this case, 15V is the maximum supply voltage (Vsup). The frequency of operation is 100kHz. The operating supply voltage of this electrical device is 12V. It is powered by a dual supply voltage of 5V. The device supports the output voltage of 18V.
TC9401CPD Features
14-DIP (0.300, 7.62mm) package
14 terminations
14 pin count
14 pins
A dual supply voltage of 5V
TC9401CPD Applications
There are a lot of Microchip Technology TC9401CPD V/F & F/V Converters applications.
- Touch or Sound Switches
- Integrating a/d converter
- Clutch Control
- Analog Data Transmission and Recording
- lsolation of High Common-Mode Voltages
- Cruise Control
- Microprocessor Data Acqusition
- Isol ated data transmission
- Phase Locked Loops
- Breaker Point Dwell Meters
