TCM809SVLB713
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-70, SOT-323 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 174mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TCM809 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 9μA |
| Power Dissipation | 174mW |
| Adjustable Threshold | NO |
| Quiescent Current | 12μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.93V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Supply Current-Max (Isup) | 0.025mA |
| Min Reset Threshold Voltage | 2.89V |
| Max Reset Threshold Voltage | 2.96V |
| Threshold Voltage | +2.93V |
| Undervoltage Threshold | 2.89V |
| Overvoltage Threshold | 2.96V |
| Height | 1.1mm |
| Length | 2.25mm |
| Width | 2.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
TCM809SVLB713 Overview
There are 3 terminals connected to this power management, which makes it easy to mount. Packaging is in the form of a Tape & Reel (TR). As a reference, this IC management includes 1 functions for your convenience. A series of 1 channels can be found on this supervisor. There are SC-70, SOT-323 functions included in this PMIC so that you can refer to them. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. In a 3.3V supply voltage, the power management conducts. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount mounts power management on the wall. The power management belongs to the Power Management Circuits subcategory. It has a total of 3 pins that are attached to IC management. Pin count of the power management is 3. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. The supervisor's supply current is specified to 9μA. You can always use TCM809, the base supervisor number, to search for similar PMICs of the manufacturer.
TCM809SVLB713 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
9μA operating supply current
TCM809SVLB713 Applications
There are a lot of Microchip Technology TCM809SVLB713 Voltage Supervisors applications.
- Detection of phase sequence
- Refrigeration
- Multi-voltage system
- Display equipment
- Important electronics for automotive safety
- Digitally controlled LDO regulators circuit
- DVR
- Cloud computing
- Battery cars
- WiFi router
