TDA4863XKLA1
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~150°C |
| Packaging | Tube |
| Published | 2003 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| HTS Code | 8542.39.00.01 |
| Voltage - Supply | 12.5V~20V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TDA4863 |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 14.5V |
| Analog IC - Other Type | POWER FACTOR CONTROLLER |
| Input Voltage (Min) | 10.5V |
| Input Voltage (Max) | 18V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | BOOST |
| Mode | Discontinuous Conduction (DCM) |
| Current - Startup | 20μA |
| Height Seated (Max) | 4.37mm |
| Length | 9.52mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
TDA4863XKLA1 Overview
The package is 8-DIP (0.300, 7.62mm)-shaped.The package is Tube-shaped.Mounting type Through Hole describes the device.The voltage supply of 12.5V~20V should be used.Device -40°C~150°C operates at -40°C~150°C.POWER FACTOR CONTROLLER is another IC type on the part.There are a number of 8 terminals on the gadget.There is a current of 20μA during startup.There is a number of TDA4863 in the device's best part.There are a total of 8 pins on it.Minimum input voltage 10.5V is needed to operate it.18V is its maximum input voltage (Max).
TDA4863XKLA1 Features
TDA4863XKLA1 Applications
There are a lot of Infineon Technologies TDA4863XKLA1 PFC PMICs applications.
- Wired/Wireless audio systems
- Disk drivers
- Car wiper
- VCO (Voltage-Controlled Oscillator)
- LED lighting
- Fuel injector
- Pumps
- IBIS model
- Motor controllers
- Fans
