TDA7073AT/N4,112
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e4 |
| Feature | Slew Rate Controlled |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Applications | DC Motors, General Purpose |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | TDA7073 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 18V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | Logic |
| Analog IC - Other Type | DISK DRIVE MOTOR CONTROLLER |
| Output Configuration | Half Bridge (4) |
| Output Current-Max | 1A |
| Supply Current-Max (Isup) | 16mA |
| Voltage - Load | 3V~18V |
| Current - Output / Channel | 600mA |
| Fault Protection | ESD, Over Temperature, Short Circuit |
| Source Url Status Check Date | 2013-06-14 00:00:00 |
| Load Type | Inductive |
| Height Seated (Max) | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
TDA7073AT/N4,112 Overview
Tube is used for packaging.As a cost-saving measure, H bridge is included in the 16-SOIC (0.295, 7.50mm Width) package.The supply voltage of 3V~18V can improve reliabilbridge drivery.H bridge circuit is mounted in the way of Surface Mount.H bridge motor driver is pretty useful in a wide range of applications, including DC Motors, General Purpose.In addH gateion to Slew Rate Controlled, H gate has the following specific characteristics.It is possible to terminate a transmission line with a 16 termination using the H bridge which matches the characteristic impedance of the transmission line.The base H bridge ic number of TDA7073 allows you to find more related H bridge ics by using that number.To operate H bridge circuit, a voltage supply of 5V is required.This H bridge circuit incorporates an analog IC with the type DISK DRIVE MOTOR CONTROLLER.It is the 16 pins that enable this bridge driver to perform its specific functions.H bridge motor drivers in the subcategory Motion Control Electronics have a wide range of similarities.An electrical load is supplied with power from 5V.
TDA7073AT/N4,112 Features
Available in 16-SOIC (0.295, 7.50mm Width) Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : TDA7073
TDA7073AT/N4,112 Applications
There are a lot of NXP USA Inc. TDA7073AT/N4,112 Full Bridge Drivers, Half-Bridge Drivers applications.
- Quad DC motor
- Telecom Microprocessor
- Compact Blade Servers
- PC peripherals
- Voltage Regulators for CPUs
- Non-V-Core
- Dual DC motor
- Industrial Fans
- High-Performance Gaming Motherboards
- DVD players
