TDA7266
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Multiwatt-15 (Vertical, Bent and Staggered Leads) |
| Number of Pins | 15 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Mute, Short-Circuit and Thermal Protection, Standby |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 15 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Tin (Sn) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 33W |
| Technology | BIPOLAR |
| Voltage - Supply | 3V~18V |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Base Part Number | TDA7266 |
| Pin Count | 15 |
| Output Type | 2-Channel (Stereo) |
| Operating Supply Voltage | 11V |
| Supply Voltage-Max (Vsup) | 18V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 2 |
| Nominal Supply Current | 2A |
| Power Dissipation | 33W |
| Quiescent Current | 50mA |
| Output Power | 7W |
| Supply Type | Single |
| Bandwidth | 15 kHz |
| Voltage Gain | 26dB |
| Power Supply Rejection Ratio (PSRR) | 56dB |
| Gain | 26 dB |
| Max Output Power | 7W |
| Max Output Power x Channels @ Load | 7W x 2 @ 8 Ω |
| Harmonic Distortion | 10% |
| Load Impedance | 8Ohm |
| Height | 10.7mm |
| Length | 19.6mm |
| Width | 5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TDA7266 Overview
In the Multiwatt-15 (Vertical, Bent and Staggered Leads) package, it is embedded.Tube is the packaging method.The 15 termination refers to terminating transmission lines with devices that match their characteristic impedance.The output it is configured with uses 2-Channel (Stereo) .In this case, it is an electrical device of type Class AB .In a computer or other communication device, there are 15 pins, which are pronged contacts.The electronic component is mounted in the way of Through Hole .Its supply voltage is 3V~18V volts.2 channels are available on the device.When operating, it is possible to ensure Mute, Short-Circuit and Thermal Protection, Standby .A temperature greater than 0°C~70°C TA should not be used.Amp parts is equipped wAmp partsh 15 pin count.The part belongs to Audio/Video Amplifiers .The TDA7266 family includes it.The chip should be mounted in the way of Through Hole .This electronic component's maximum output power is 7W kWh per hour.For normal operation, the supply voltage (Vsup) should be kept above 3V .In this case, the maximum supply voltage (Vsup) reaches 18V .There is a supply type of Single for this electronic part.The device consumes 50mA quiescent current and is unaffected by external influences.
TDA7266 Features
Multiwatt-15 (Vertical, Bent and Staggered Leads) package
15 pin count
TDA7266 family
7W kWh per hour
TDA7266 Applications
There are a lot of STMicroelectronics TDA7266 audio amplifiers applications.
- Communication
- Oscilloscopes
- Precision measurement
- Addition and subtraction operation circuits
- Active probe
- Computer workstations and wireless base stations
- Signal transformation
- Signal amplification
- Scintillation detectors
- Vehicle electronics
