banner_page

TDE1707BFP

Bipolar PMIC TDE170 8 Pin 24V 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-TDE1707BFP
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 442
  • Description: Bipolar PMIC TDE170 8 Pin 24V 8-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Interface On/Off
Output Configuration High Side or Low Side
Output Current 500mA
Voltage - Supply (Vcc/Vdd) Not Required
Propagation Delay 15 μs
Input Type Non-Inverting
Turn On Delay Time 15 μs
Switch Type General Purpose
Min Input Voltage 6V
Max Input Voltage 48V
Output Current per Channel 500mA
Nominal Input Voltage 50V
Ratio - Input:Output 1:2
Voltage - Load 6V~48V
Driver Number of Bits 2
Fault Protection Current Limiting (Fixed), Over Temperature
Output Peak Current Limit-Nom 0.7A
Built-in Protections TRANSIENT; OVER CURRENT; THERMAL
Height 1.25mm
Length 5mm
Width 4mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 7 months ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -25°C~85°C TA
Packaging Tube
JESD-609 Code e4
Feature 5V Regulated Output
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Peripheral Drivers
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 24V
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number TDE170
Pin Count 8
Number of Outputs 2
Output Voltage 5V
Output Type Bipolar
Max Output Current 1.5A
Operating Supply Voltage 48V
Number of Channels 1

TDE1707BFP Overview


The LED driver's packaged as a Tube.It is included in the package 8-SOIC (0.154, 3.90mm Width).Mounting type Surface Mount is selected for the LED driving board.It owns the General Purpose switch type.To ensure reliable operation, set the temperature to -25°C~85°C TA.There are 2 outputs available on this lighting driver.Operation is based on a supply voltage of Not Required.The maximum output voltage of this LED driver is Bipolar volts.A lighting driver with 5V Regulated Output features is available.It comes under the family of TDE170.The termination count is 8.It is necessary to use the 8 pins in order to operate the LED driver.It is important to note that the LED driving board has 1 functions.To meet the operation criteria, the maximum output current drops to 1.5A.High efficiency is possible when the supply voltage is set to 24V.In this case, it is mounted in the way of Surface Mount.The LED driver has a total of 8 pins.In this case, the output current will be set to 500mA.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.We offer 1 channels in total.It is recommended that the supply voltage be set at 48V in order to achieve maximum efficiency.As far as input voltage goes, its maximum is 48V volts.As far as input voltage goes, it has a minimum of 6V volts.

TDE1707BFP Features


Supplied from 24V
1 channels

TDE1707BFP Applications


There are a lot of STMicroelectronics TDE1707BFP Power Switches ICs applications.

  • USB3.1 Power Delivery
  • Mobile Communication Devices
  • Low Voltage I/O System Power
  • Hot Swap
  • Various applications equipped with buttons
  • USB Power Distribution
  • Wearable Devices
  • HDD, SSD
  • PDAs
  • Solid State Drivers

Write a review

Note: HTML is not translated!
    Bad           Good