TDE1707DFT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Supplier Device Package | 8-DFN (4x4) |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Feature | 5V Regulated Output |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -25°C |
| Base Part Number | TDE1707 |
| Number of Outputs | 2 |
| Output Type | Bipolar |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 48V |
| Interface | On/Off |
| Current - Output (Max) | 500mA |
| Output Configuration | High Side or Low Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 6V |
| Max Input Voltage | 48V |
| Output Current per Channel | 500mA |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 6V~48V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TDE1707DFT Overview
It is package in Tape & Reel (TR) case.There is a 8-VDFN Exposed Pad package that includes it.The LED driver is mounted as Surface Mount.General Purpose is the switch type it owns.In order to guarantee reliable performance, the temperature should be set to -25°C~85°C TA.It is possible to use 2 outputs in the lighting driver.A supply voltage of Not Required is required for it to operate.There is a maximum output voltage of Bipolar volts on this LED driver.In terms of features, the LED driving board has 5V Regulated Output.The TDE1707 family consists of this type.During operation, the 8 pins are used.The LED driver output is limited to 500mAV.As a result, the maximum output current is reduced to 1.5A in order to meet the operation requirements.Surface Mount is mounted in the way.In this case, the output current will be set to 500mA.In order to achieve the best efficiency, the supply voltage should be set to 48V.The maximum input voltage of the LED driver is 48V volts.There is a minimum input voltage of 6V volts.In order to ensure stable operation, a maximum operating temperature of 85°C°C should be maintained.Reliability is ensured by operating at a minimum working temperature of -25°C degrees Celsius.
TDE1707DFT Features
TDE1707DFT Applications
There are a lot of STMicroelectronics TDE1707DFT Power Switches ICs applications.
- Portable GPS
- PC Cards
- Wearable Devices
- Various applications equipped with buttons
- Wireless/Networking Cards
- Hard Disk Drives
- Solid State Drivers
- Gaming
- Portable Music Players
- Portable Devices
