TEA3718SFP
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Additional Feature | ALSO REQUIRES A 10 TO 45 V SUPPLY |
| Subcategory | Motion Control Electronics |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Base Part Number | TEA3718 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Operating Supply Voltage | 50V |
| Power Supplies | 510/45V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Number of Channels | 2 |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Nominal Supply Current | 25mA |
| Output Configuration | Half Bridge (2) |
| Current - Output | 1.5A |
| Logic Function | AND |
| Voltage - Load | 10V~45V |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1, 1/2 |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
TEA3718SFP Overview
The design contains a Tubepackage.Drivers controllers comes in a 20-SOIC (0.295, 7.50mm Width) case.Ideally, the part should be mounted by Surface Mount.This component is suitable for the component connected to General Purpose.In this case, the device can supply 4.75V~5.25V volts.A range of 0°C~150°C TJis available for operating temperature.The part has 20terminations available.Drivers controllers is possible to apply voltage to the load at the rate of 10V~45V.Drivers controllers is recommended that this amplifier be run at 5V.There is Surface Mount recommended mounting method for this device.Maintain the current output of the part at 1.5A volts.The device utilizes the IC STEPPER MOTOR CONTROLLERwhich is an analog IC.According to the TEA3718part number, the part is found.The device has 20 pins.Drivers controllers is part of the series [0].The supply voltage for this driver is 50V.There is also a characteristic ALSO REQUIRES A 10 TO 45 V SUPPLYassociated with it.Controller ic has 2channels.
TEA3718SFP Features
Applications : General Purpose
Load voltage across the chip 10V~45V
base on TEA3718 number
Additional Feature: ALSO REQUIRES A 10 TO 45 V SUPPLY
TEA3718SFP Applications
There are a lot of STMicroelectronics TEA3718SFP motor drivers applications.
- Emergency lighting
- Indicator
- Monitoring the energy that the luminaire uses
- Telltale lights
- CHMSL (center high-mount stop lamps)
- Industrial lighting
- Outdoor area lights
- Display LED backlighting
- High brightness LED lighting
- Tail lights
