TEMD5080X01
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | PCB, Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 2-SMD, No Lead |
| Number of Pins | 2 |
| Diode Element Material | SILICON |
| Operating Temperature | -40°C~100°C |
| Packaging | Digi-Reel® |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| HTS Code | 8541.10.00.80 |
| Max Power Dissipation | 215mW |
| Technology | POSITIVE-INTRINSIC-NEGATIVE |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 4 |
| JESD-30 Code | R-PDSO-F4 |
| Number of Elements | 1 |
| Configuration | SINGLE |
| Diode Type | PIN |
| Power Dissipation | 215mW |
| Viewing Angle | 130° |
| Forward Current | 50mA |
| Lens Style | Clear |
| Rise Time | 40ns |
| Forward Voltage | 1.3V |
| Fall Time (Typ) | 40 ns |
| Max Reverse Voltage (DC) | 25V |
| Reverse Breakdown Voltage | 25V |
| Wavelength | 940nm |
| Reverse Voltage (DC) | 25V |
| Dark Current | 2nA |
| Spectral Range | 350nm ~ 1100nm |
| Diode Capacitance-Max | 40pF |
| Active Area | 7.7mm2 |
| Color - Enhanced | Blue |
| Height | 1.08mm |
| Length | 4.2mm |
| Width | 5mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TEMD5080X01 Overview
To protect them from damage, these photodiodes are packaged in the Digi-Reel?. To ensure safety, the photodiodes are packaged in 2-SMD, No Lead packages. When operating in reverse-bias mode, the photodiodes should not exceed 25V. There are 2 pins on the photodiodes. Within a circuit, photodiodes could generate 215mW heat. The reverse anode voltage for the photodiodes should be 25V. An ideal circuit would allow the photodiodes to release a maximum amount of heat in the form of 215mW heat. A reverse voltage 25V does not affect the photodiodes in the DC circuit. The voltage needed to get current to flow across a photodiode should be 1.3V. The current in a photodiode is 2nA even when there is no light input.
TEMD5080X01 Features
Moisture Sensitivity Level (MSL): 4 (72 Hours)
Operating Temperature: -40°C~100°C
Packaging: Digi-Reel?
Diode Type: PIN
Mount: PCB, Surface Mount
Spectral Range: 350nm ~ 1100nm
Viewing Angle: 130°
TEMD5080X01 Applications
There are a lot of Vishay Semiconductor Opto Division TEMD5080X01 Photodiodes applications.
- LiDAR
- Pulse Oximetry
- YAG laser detection
- Solar Cells
- Infrared remote control
- Light Barriers
- Electronic Equipment
- High speed photo detector
- Emitter Alignment
- Health Monitoring
