TEMD5110X01
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | PCB, Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-SMD, No Lead |
| Number of Pins | 2 |
| Operating Temperature | -40°C~100°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 215mW |
| Diode Type | PIN |
| Power Dissipation | 215mW |
| Viewing Angle | 130° |
| Forward Current | 50mA |
| Response Time | 100ns |
| Voltage - DC Reverse (Vr) (Max) | 60V |
| Rise Time | 100ns |
| Forward Voltage | 1.3V |
| Fall Time (Typ) | 100 ns |
| Max Reverse Voltage (DC) | 60V |
| Reverse Breakdown Voltage | 60V |
| Wavelength | 940nm |
| Reverse Voltage (DC) | 60V |
| Dark Current | 2nA |
| Spectral Range | 790nm ~ 1050nm |
| Active Area | 7.5mm2 |
| Current - Dark (Typ) | 2nA |
| Height | 1.08mm |
| Length | 4.2mm |
| Width | 5mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TEMD5110X01 Overview
To protect the photodiodes, they are packed in the Tape & Reel (TR). Photodiodes are packaged in 4-SMD, No Lead packages in order to ensure their safety. In reverse-bias mode, the photodiodes are capable of withstanding a maximum voltage of 60V. When operating in reverse-bias mode, the photodiodes should not exceed 60V. 2 pins are present on the photodiodes. Photodiodes on a circuit are capable of emitting 215mW heat. It is recommended that photodiodes are operated at a temperature no higher than 100°C. However, the minimum operating temperature of the photodiodes should be set to -40°C. It should be 60V for the reverse anode voltage of the photodiodes. A circuit should have a maximum heat release rate of 215mW from the photodiodes. In the DC circuit, photodiodes can be operated correctly with reverse voltage of 60V. Photodiodes are supposed to operate at 1.3V voltage. Despite the absence of light, photodiodes make 2nA current.
TEMD5110X01 Features
Moisture Sensitivity Level (MSL): 4 (72 Hours)
Operating Temperature: -40°C~100°C
Packaging: Tape & Reel (TR)
Diode Type: PIN
Mount: PCB, Surface Mount
Spectral Range: 790nm ~ 1050nm
Response Time: 100ns
Viewing Angle: 130°
TEMD5110X01 Applications
There are a lot of Vishay Semiconductor Opto Division TEMD5110X01 Photodiodes applications.
- YAG laser detection
- Infrared data transmission
- Light Barriers
- Diode Laser Monitoring
- Medical and Industrial
- Optical Analytics
- Heart Rate Monitoring
- Light Bariers
- Position sensing
- Low Cost Light Monitoring
