THS3091DDA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-PowerSOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 70.590313mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 2.18W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | THS3091 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 9.5mA |
| Nominal Supply Current | 9.5mA |
| Power Dissipation | 2.18W |
| Slew Rate | 7300V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 4μA |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±5V~15V |
| Output Current per Channel | 280mA |
| Input Offset Voltage (Vos) | 900μV |
| Bandwidth | 235MHz |
| Gain Bandwidth Product | 235MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 235000 kHz |
| Average Bias Current-Max (IIB) | 20μA |
| Power Supply Rejection Ratio (PSRR) | 68dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Settling Time | 42 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 180MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Max I/O Voltage | 4mV |
| Input Voltage Noise Density | 2nV/sqrt Hz |
| Height | 1.7mm |
| Length | 4.89mm |
| Width | 3.9mm |
| Thickness | 1.48mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS3091DDA Overview
There is a 8-PowerSOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. An op amp ic of the Current Feedback type. Instrumentation amplifier is delivered in a Tube case. It is estimated that there will be 8 terminations in the next few months. In this case, there are 8 pins on the board. Please take in mind that this instrumentation amplifier should be run at 15V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 8 pins are available on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 900μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . The buffer amplifier is capable of operating from a supply current of 9.5mA . The op amp ic has 1 channels on it.
THS3091DDA Features
8 Pins
supply voltage of 15V
THS3091DDA Applications
There are a lot of Texas Instruments THS3091DDA Instrumentational OP Amps applications.
- Radiation thermometry transducers
- Television
- Non-polarized electrodes
- Video amplifiers
- Industrial control system
- Medical imaging
- Signal amplification
- Ultrasound transducers
- Thermocouples
- Logarithmic operation circuits
