THS4131IDGK

1 Channels 85mA per Channel 2μA 80 dB Instrumentational OP Amps 6μA 5V 4V~33V ±2V~16.5V THS4131 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-THS4131IDGK
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 225
Description: 1 Channels 85mA per Channel 2μA 80 dB Instrumentational OP Amps 6μA 5V 4V~33V ±2V~16.5V THS4131 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Power Dissipation	385mW
Min Input Voltage	1.23V
Slew Rate	52V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	Differential
Common Mode Rejection Ratio	80 dB
Current - Input Bias	2μA
Max Input Voltage	-700mV
Voltage - Supply, Single/Dual (±)	4V~33V ±2V~16.5V
Output Current per Channel	85mA
Input Offset Voltage (Vos)	2mV
Bandwidth	150MHz
Gain Bandwidth Product	225MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Unity Gain BW-Nom	170000 kHz
Voltage Gain	78dB
Average Bias Current-Max (IIB)	6μA
Power Supply Rejection Ratio (PSRR)	73dB
Low-Offset	NO
Frequency Compensation	YES
Voltage - Input Offset	200μV
Settling Time	78 ns
Low-Bias	NO
Micropower	NO
-3db Bandwidth	80MHz
Bias Current-Max (IIB) @25C	6μA
Programmable Power	NO
Dual Supply Voltage	15V
Max I/O Voltage	2mV
Input Offset Current-Max (IIO)	0.5μA
Height	1.07mm
Length	3mm
Width	3mm
Thickness	970μm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	8
Weight	23.303308mg
Operating Temperature	-40°C~85°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	34MOhm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Max Power Dissipation	385mW
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.65mm
Base Part Number	THS4131
Pin Count	8
Operating Supply Voltage	5V
Number of Channels	1
Operating Supply Current	12.3mA
Nominal Supply Current	14mA

THS4131IDGK Overview

It is packaged in an 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case that protects the operational amplifiers from damage. An op amp ic of the Differential type. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. The number of terminations is approaching the 8 mark. A total of 8 pins are located on this board. It is important to remember that this op amp should be operated at a voltage of 5V volts. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. The buffer op amp includes 8 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 2mV. For this electronic part, it is recommended that you mount it with type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~85°C. Operational amplifier can operate supply current at 12.3mA. Voltage gain should remain at 78dB. On the buffer amps, there are 1 channels that can be used. The operating supply voltage of instrumentation amplifier is rated 5V voltage. 34MOhm is the range in which the instrumentation amplifier resistance should lie.