THS4222DGN
| Parameters | |
|---|---|
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 3mV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 12MHz |
| Bias Current-Max (IIB) @25C | 5μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Offset Current-Max (IIO) | 0.7μA |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 1.71W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | THS4222 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Operating Supply Current | 14mA |
| Nominal Supply Current | 36mA |
| Power Dissipation | 1.71W |
| Slew Rate | 990V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 74 dB |
| Current - Input Bias | 900nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~15V ±1.35V~7.5V |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 10mV |
| Bandwidth | 230MHz |
| Gain Bandwidth Product | 120MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 230000 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 5μA |
| Power Supply Rejection Ratio (PSRR) | 62dB |
THS4222DGN Overview
The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case which makes it easy for the consumer to handle. The instrumentation amplifier in this picture is of the Voltage Feedback-type. A Tube case is used for delivering the op amp. A total of 8 terminations have been reported in the past few weeks. A total of 8 pins are attached to buffer op amp. I would like to remind you that this buffer op amp should be powered by an 5V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. The op amp ic has an array of 8 pins on it. Regarding input offset voltage, op amp rates 10mV. This electronic part is recommended for mounting type Surface Mount. With regard to operating temperature, op amp ranges -40°C~85°C. The buffer amplifier is capable of operating from a supply current of 14mA . Op amp is a member of the 100dB's 100dB family. There are a total of 2 channels available on the op amps. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals.
THS4222DGN Features
8 Pins
supply voltage of 5V
100dB voltage gain
Output Type: Rail-to-Rail
THS4222DGN Applications
There are a lot of Texas Instruments THS4222DGN Instrumentational OP Amps applications.
- Weighing systems
- Power generator
- Tablets
- Mobile phone
- E-book readers
- Integrator circuits
- High speed sample
- Radar
- Oscilloscopes
- Portable media players
