TIBPAL16L8-7CFN
| Parameters | |
|---|---|
| Pin Count | 20 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Programmable Type | PAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 6 |
| Nominal Supply Current | 210mA |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Organization | 10 DEDICATED INPUTS, 6 I/O |
| Output Function | COMBINATORIAL |
| Number of Dedicated Inputs | 10 |
| Number of Product Terms | 64 |
| Height Seated (Max) | 4.57mm |
| Length | 8.9662mm |
| Width | 8.9662mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount, Through Hole |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Number of Pins | 20 |
| Weight | 722.005655mg |
| Packaging | Tube |
| Series | IMPACT-X™ PAL® |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | 3A991.A.2 |
| Max Operating Temperature | 75°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.31.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | TTL |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 100MHz |
| Base Part Number | TIBPAL16L8 |
TIBPAL16L8-7CFN Overview
The PLD stock is mounted with Type Surface Mount screws.This PAL type of PLD Programmable logic device? is programmable.As a result of Programmable logic array's performance-cost ratio, IMPACT-X? PAL? Series is one of the best values available today.Programmable logic devices are widely used in the electronics industry due to Programmable logic array's 20-LCC (J-Lead) package.The use of Tube-materials in Programmable array logic's Packaging is widespread.TIBPAL16L8 is the number assigned to the PLD stock's biggest part.Surface Mount, Through Hole is mounted in the way of the PLD.20 remains the pin number for the Complex Programmable logic device.Programmable logic devices are still possible to operate precisely at 100MHz frequency.The current maximum working temperature is 75°C.It should be warmer in Programmable logic device's operation than 0°C.4.75Vvolts is the only supply voltage it can handle.There is only one supply voltage that it can work with, 5.25V.It has programmable 6 I/Os.At all times, the Complex Programmable logic device is powered by 5V.Inputs are dedicated to 10 on this board.The termination is set to 20.It can be categoriProgrammable Logic Devicesed under the Programmable Logic Devices subcategory.5V is the Programmable logic device's supply. 64 is the number of product terms.Multiple 8 outputs exist.You need 5V voltage to operate it.20 pins on the board are used for specific purposes.
TIBPAL16L8-7CFN Features
Mounting type of Surface Mount
Maximum temperature of 75°C
6 I/Os
TIBPAL16L8-7CFN Applications
There are a lot of Texas Instruments TIBPAL16L8-7CFN PLDs (Programmable Logic Device) applications.
- Programmable Logic Devices
- High performance applications
- High-end communication equipment
- Electrically Devices
- high-performance microcomputer systems
- Software
- Power-limited applications
- Low power applications
- Battery operated devices
- Highly complex logic
