TIBPAL16R4-10CFN
| Parameters | |
|---|---|
| Mount | Surface Mount, Through Hole |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Number of Pins | 20 |
| Weight | 722.005655mg |
| Packaging | Tube |
| Series | IMPACT-X™ PAL® |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Max Operating Temperature | 75°C |
| Min Operating Temperature | 0°C |
| Additional Feature | POWER-UP RESET; REGISTER PRELOAD |
| Subcategory | Programmable Logic Devices |
| Technology | TTL |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 85MHz |
| Base Part Number | TIBPAL16R4 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Programmable Type | PAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 4 |
| Nominal Supply Current | 180mA |
| Max Supply Current | 180mA |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Output Function | MIXED |
| Number of Dedicated Inputs | 8 |
| Number of Product Terms | 64 |
| Length | 8.9662mm |
| Width | 8.9662mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TIBPAL16R4-10CFN Overview
Mounting is done using Type Surface Mount.Programmable logic devices are programmable type of PLD Programmable logic device? PAL.Performance-cost ratio makes IMPACT-X? PAL? Series the best value on the market.20-LCC (J-Lead) has a package, so Programmable logic devices are widely used in electronics.Programmable logic devices are used for Programmable array logic's Packaging to use Tube-materials.The number TIBPAL16R4 refers to the PLD stock's largest part.Surface Mount, Through Hole is the direction in which the PLD is mounted.Complex Programmable logic device 20 remains Programmable logic array's pin number.When 85MHz frequency is used, it still functions precisely.Currently, maximum working temperature is 75°C.When Programmable logic device is operating, it should be warmer than 0°C.A supply voltage of 4.75V volts is necessary for it to function.5.25V is the only supply voltage it can work with.4 I/Os are programmable.5V is always used to power the Complex Programmable logic device.Inputs dedicated to 8 are embedded in the PLD.The termination is set to 20.You can apply it to the Programmable Logic Devices subcategory.Supplies for the Programmable logic device are 5V. 64 is the number of product terms.Numerous 8 outputs are present.There is a requirement for 5V voltage in order to make it work.Board 20 pins serve specific purposes.The maximum supply temperature it can handle is 180mA.One of the additional features is POWER-UP RESET; REGISTER PRELOAD, to name a few.
TIBPAL16R4-10CFN Features
Mounting type of Surface Mount
Maximum temperature of 75°C
4 I/Os
TIBPAL16R4-10CFN Applications
There are a lot of Texas Instruments TIBPAL16R4-10CFN PLDs (Programmable Logic Device) applications.
- Microcomputer systems
- High-speed Devices
- Various types of power-limited applications
- high-performance microcomputer systems
- Programmable Logic Devices
- Industrial
- Power-limited applications
- Battery operated devices
- Low power applications
- High performance applications
