TIBPAL16R6-5CFN
| Parameters | |
|---|---|
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Programmable Type | PAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 2 |
| Voltage - Input | 5V |
| Propagation Delay | 7 ns |
| Organization | 8 DEDICATED INPUTS, 2 I/O |
| Output Function | MIXED |
| Number of Dedicated Inputs | 8 |
| Number of Product Terms | 64 |
| Height Seated (Max) | 4.57mm |
| Length | 8.9662mm |
| Width | 8.9662mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Number of Pins | 20 |
| Weight | 722.005655mg |
| Packaging | Tube |
| Series | IMPACT-X™ PAL® |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Max Operating Temperature | 75°C |
| Min Operating Temperature | 0°C |
| Additional Feature | POWER-UP RESET; REGISTER PRELOAD |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | TTL |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TIBPAL16R6 |
| Pin Count | 20 |
| Number of Outputs | 6 |
TIBPAL16R6-5CFN Overview
The PLD stock is mounted with Type Surface Mount screws.PAL is the programmable type of PLD Programmable logic device?.IMPACT-X? PAL? Series has the best performance-cost ratio available.Programmable logic devices are widely used in the electronics industry due to Programmable logic array's 20-LCC (J-Lead) package.Programmable array logic's Packaging is made from Tube-materials.There is an Programmable logic device's input voltage for 5V.This PLD stock is most notable for Programmable logic array's TIBPAL16R6-shaped biggest part.A mount is used to mount the PLD in the way of Surface Mount.A Complex Programmable logic device's pin number is 20.When Programmable logic devices are operated at 125MHz frequency, it continues to function accurately.As of now, 75°C is the maximum working temperature.If it's operating properly, it should be warmer than 0°C.There is only one operating voltage required: 4.75V volts.There is only one supply voltage that it can work with, 5.25V.There are programmable 2 I/Os on the board.Power is always provided by 5V.Inputs are dedicated to 8 on this board.It has been programmed with a 20 termination.Programmable Logic Devices subcategory can be applied to it.Supplies 5V are used in the Programmable logic device.There are 64 terms in the product.Many 6 outputs exist.A 20 pin is used for a specific purpose on the board.One of the additional features is POWER-UP RESET; REGISTER PRELOAD, to name a few.
TIBPAL16R6-5CFN Features
Mounting type of Surface Mount
Input voltage of 5V
Maximum temperature of 75°C
2 I/Os
TIBPAL16R6-5CFN Applications
There are a lot of Texas Instruments TIBPAL16R6-5CFN PLDs (Programmable Logic Device) applications.
- Various types of power-limited applications
- Microcomputer systems
- Electrically Devices
- High-end communication equipment
- Power-limited applications
- High performance applications
- Programmable Logic Devices
- Software
- high-performance microcomputer systems
- Battery operated devices
