Parameters |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
20-DIP (0.300, 7.62mm) |
Number of Pins |
20 |
Packaging |
Tube |
Series |
IMPACT-X™ PAL® |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Termination |
Through Hole |
Max Operating Temperature |
75°C |
Min Operating Temperature |
0°C |
Additional Feature |
POWER-UP RESET; REGISTER PRELOAD |
HTS Code |
8542.39.00.01 |
Subcategory |
Programmable Logic Devices |
Technology |
TTL |
Terminal Position |
DUAL |
Supply Voltage |
5V |
Terminal Pitch |
2.54mm |
Frequency |
125MHz |
Base Part Number |
TIBPAL16R8 |
Pin Count |
20 |
Number of Outputs |
8 |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Temperature Grade |
COMMERCIAL EXTENDED |
Programmable Type |
PAL |
Max Supply Voltage |
5.25V |
Min Supply Voltage |
4.75V |
Max Supply Current |
180mA |
Propagation Delay |
4.5 ns |
Turn On Delay Time |
5 ns |
Organization |
8 DEDICATED INPUTS, 0 I/O |
Output Function |
REGISTERED |
Number of Dedicated Inputs |
8 |
Number of Product Terms |
64 |
Height Seated (Max) |
5.08mm |
Length |
24.325mm |
Width |
7.62mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TIBPAL16R8-5CN Overview
The PLD stock is mounted using Type Through Hole.It has a type of PLD Programmable logic device? of PAL programmable.The best value on the market can be found in IMPACT-X? PAL? Series' performance-cost ratio.Electronics manufacturers use the 20-DIP (0.300, 7.62mm) because of Programmable logic array's package.Programmable array logic's Packaging uses Tube-materials.There is a TIBPAL16R8-shaped section on the PLD stock that is Programmable logic array's biggest part.There is a Through Hole-mount for the PLD.Complex Programmable logic device 20 remains Programmable logic array's pin number.Programmable logic devices are still possible to operate precisely at 125MHz frequency.In the current state, 75°C is the maximum working temperature.When Programmable logic device is in Programmable logic device's operation, it should be warmer than 0°C.Using a 4.75V volt supply voltage is the only way for it to work.It can only be powered by a 5.25V supply voltage.At all times, the Complex Programmable logic device is powered by 5V.A dedicated input for 8 is embedded in the PLD.Programming has included a 20 termination.There is also the possibility of applying the Programmable Logic Devices subcategory.There are 5V supplies in the Programmable logic device.A product term has a 64 value.There are numerous 8 outputs.The Programmable logic device requires 5V voltage to operate.On the board, there are 20 pins used for specific purposes.If you supply it with a temperature of 180mA or less, it should work.There are several additional features, including POWER-UP RESET; REGISTER PRELOAD.
TIBPAL16R8-5CN Features
Mounting type of Through Hole
Maximum temperature of 75°C
TIBPAL16R8-5CN Applications
There are a lot of Texas Instruments TIBPAL16R8-5CN PLDs (Programmable Logic Device) applications.
- High-end communication equipment
- high-performance microcomputer systems
- Electrically Devices
- Highly complex logic
- Power-limited applications
- Battery operated devices
- Programmable Logic Devices
- High-speed Devices
- High performance applications
- Industrial