Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
28-LCC (J-Lead) |
Number of Pins |
28 |
Packaging |
Tube |
Series |
IMPACT-X™ PAL® |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
28 |
Max Operating Temperature |
75°C |
Min Operating Temperature |
0°C |
Additional Feature |
REGISTER PRELOAD; POWER-UP RESET |
HTS Code |
8542.39.00.01 |
Subcategory |
Programmable Logic Devices |
Technology |
TTL |
Terminal Position |
QUAD |
Terminal Form |
J BEND |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Reach Compliance Code |
not_compliant |
Frequency |
50MHz |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
TIBPAL20R6 |
Pin Count |
28 |
Number of Outputs |
8 |
Qualification Status |
Not Qualified |
Power Supplies |
5V |
Temperature Grade |
COMMERCIAL EXTENDED |
Programmable Type |
PAL |
Max Supply Voltage |
5.25V |
Min Supply Voltage |
4.75V |
Number of I/O |
2 |
Voltage - Input |
5V |
Propagation Delay |
25 ns |
Organization |
12 DEDICATED INPUTS, 2 I/O |
Output Function |
MIXED |
Number of Dedicated Inputs |
12 |
Number of Product Terms |
64 |
Height Seated (Max) |
4.57mm |
Length |
11.5062mm |
Width |
11.5062mm |
RoHS Status |
Non-RoHS Compliant |
TIBPAL20R6-25CFN Overview
The PLD stock is mounted with Type Surface Mount screws.It has the programmable type of PLD Programmable logic device? PAL.A high performance-to-cost ratio makes IMPACT-X? PAL? Series the best value on the market.Programmable logic devices are widely used in the electronics industry due to Programmable logic array's 28-LCC (J-Lead) package.Tube-materials are used for Programmable array logic's Packaging.The Programmable logic device's input voltage of 5V is provided.TIBPAL20R6 represents the largest part of the PLD stock.Surface Mount is the direction in which the PLD is mounted.There is no change to the pin number for the Complex Programmable logic device, which remains 28.The 50MHz frequency can still be used precisely.Programmable logic devices are currently possible to work at a maximum temperature of 75°C.A 0°C warm environment is required while the machine is in Programmable logic device's operation.Only 4.75V volts will work with Programmable logic controller.There is 5.25V supply voltage that can be used with Programmable logic controller.2 I/Os can be programmed.Whenever the Complex Programmable logic device is powered, Programmable logic devices are powered from 5V.Programmable logic devices are embedded with 12 dedicated inputs.It has been programmed with a 28 termination.A subcategory of Programmable Logic Devices can be applied to it.Programmable logic device supplies are 5V. 64 is the number of product terms.Programmable logic devices are possible to output 8 in a number of ways.A 28 pin is used for a specific purpose on the board.There are several additional features, including REGISTER PRELOAD; POWER-UP RESET.
TIBPAL20R6-25CFN Features
Mounting type of Surface Mount
Input voltage of 5V
Maximum temperature of 75°C
2 I/Os
TIBPAL20R6-25CFN Applications
There are a lot of Texas Instruments TIBPAL20R6-25CFN PLDs (Programmable Logic Device) applications.
- Battery operated devices
- High-speed Devices
- Industrial
- Highly complex logic
- Power-limited applications
- Microcomputer systems
- Software
- Low power applications
- Programmable Logic Devices
- High performance applications