TL1451CNSR
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 6V |
| Base Part Number | TL1451 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 2.5V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 6V |
| Input Voltage-Nom | 6V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Operating Supply Current | 1.7mA |
| Output Configuration | Positive |
| Output Current | 20mA |
| Voltage - Supply (Vcc/Vdd) | 3.6V~50V |
| Control Features | Frequency Control |
| Topology | Buck, Boost, Flyback |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1kHz~500kHz |
| Input Voltage (Max) | 50V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 500kHz |
| Isolation | Non-Isolated |
| Duty Cycle | 100 % |
| Output Phases | 1 |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
TL1451CNSR Overview
With a 16-SOIC (0.209, 5.30mm Width) package, the switching controller is suitable for a wide range of applications. It is sufficient to generate 2 outputs with this dc motor controller. PMIC is packaged in a solid enclosure of Tape & Reel (TR). It is capable of handling Transistor Driver dc switching's outputs (s). dc controls with 3.6V~50V voltage are supplied and operated. Workable in an dc switcher where -20°C~85°C TA is the -20°C~85°C TArm. Switching can be done at 1kHz~500kHz with this switching controller. As it has a Surface Mount value, it can be used for general dc dc regulator. The dcdc regulator features Frequency Control for efficient switching control. The switch converters are connected to an analog IC with a DUAL SWITCHING CONTROLLER output. DUAL are the position of the terminal of the switching converters. Various 16 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. 6V nominal DC switcher's voltage input. A search for "TL1451" will reveal other relevant dc to dc converter ics. 16 pins are on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. DC regulator outputs 2.5V voltage based on test statistics. It should be noted that the dc to dc regulator only accepts 50V voltage as input voltage. The dc dc regulator's usual output current is 20mA, which should be noted down when you start a project. DC regulators have a maximum frequency of 500kHz. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 6V. There must be a voltage supply of 6V volts. 1.7mA volts is the supply current.
TL1451CNSR Features
Transistor Driver Outputs
Switching Frequency: 1kHz~500kHz
Frequency Control
PULSE WIDTH MODULATION
TL1451CNSR Applications
There are a lot of Texas Instruments TL1451CNSR DC to DC converter applications.
- Large fire protection systems
- Solar power plants
- USB circuits
- Automatic plug-in machines
- Telecommunications equipment
- Network technology
- PSRR circuits
- Scientific research
- Combined machine tools
- Serial communication converter
