TL16C2550IRHB
| Parameters | |
|---|---|
| Low Power Mode | NO |
| Data Rate (Max) | 1.5Mbps |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.1875 MBps |
| Communication Protocol | ASYNC, BIT |
| FIFO's | 16 Byte |
| With Modem Control | Yes |
| Height | 1mm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Number of Pins | 32 |
| Weight | 71.809342mg |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Feature | Internal Oscillator |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATES AT 1.8V MINIMUM SUPPLY AT 10MHZ |
| HTS Code | 8542.39.00.01 |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Voltage - Supply | 1.8V~5V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | TL16C2550 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2, DUART |
| Memory Size | 16B |
| Operating Supply Current | 7.5mA |
| Nominal Supply Current | 1.5mA |
| Max Supply Current | 1.5mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 24MHz |
| Boundary Scan | NO |
TL16C2550IRHB Overview
This product is available in a cost-effective package called 32-VFQFN Exposed Pad.The transmission is conducted over 2, DUART channels.Tray is used in terms of packaging.The type uPs/uCs/Peripheral ICs of this circuit is SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.In order to configure this device, 32 terminations are used.The device operates at 5V voltage.The status of this electronic part is currently Active.There are 2 serial I/Os working as a way for data communication.Through Surface Mount, it can be mounted.There is 1.8V~5V supply voltage for it.An IC with 32 pins is what this device is.There is a 24MHz clock frequency for this IC.There are a number of similarities between this piece and most of the other pieces in the subcategory Serial IO/Communication Controllers.UART is important that the operating temperature does not exceed -40°C in order for the machine to perform normally for a long time.It is important to keep the operating temperature below 85°C to ensure a long working period.The configuration of this device is based on the 32 pins.Several characteristics of Internal Oscillator can be observed in it.The mounting method is Surface Mount.To ensure high efficiency, it operates at 5V supply voltage.Furthermore, ALSO OPERATES AT 1.8V MINIMUM SUPPLY AT 10MHZ can also be performed.Its base part number is TL16C2550.1.5mA is the maximum allowable supply current.With a supply current of 7.5mA, it is suitable for a variety of applications.The memory has a size of 16B and stores various information.
TL16C2550IRHB Features
2 serial I/Os
Clock frequency of 24MHz
Operating supply voltage of 5V
ALSO OPERATES AT 1.8V MINIMUM SUPPLY AT 10MHZ
TL16C2550IRHB Applications
There are a lot of Texas Instruments TL16C2550IRHB UARTs applications.
- Battery Operated Instruments
- Gaming Terminals
- Remote Access Servers
- Cellular Phones DataPort
- Universal PCI Bus Add-in Card
- Cellular data devices
- Portable Appliances
- Multimedia Systems
- Telecommunication Network Routers
- DTE for Modem Communication Systems
